[Marwan]

ok i dont have pictures but have a couple of riffes, here goes:
1 - Lock the spear into the trigger mech until you hear a "click"
2 - Take the line from the spear (if i recall correctly its attached to one of the spear fins) and run it to the muzzle (the front of the gun)
3 - there is a little metal plate on the left side of the barrel on the front of the gun, run the line UNDER it, then over the spear, then into the line guide (the little line groove on the top right hand side of the gun) thus fixing your spear in place..
4 - Run the line to the back again and over the line release mechanism (the metal part sticking out on the right hand side of the gun towards the back)...
If your gun is already rigged (i.e if the line is already attached by a bungee to the metal loop on the bottom side of the gun in the front, then this should do it..If not then basically run the line back to the top and attach to the bungee cord to the top of the gun (on the stainless steel eye on the bottom)..