Quote:
Originally Posted by ulysses
NiallFlinn
When you insert the blade ends into the footpockets you must initially bend the rails to the sides in order to properly/fully insert the blades. Now before you install the rails screw the blades to the footpocket with the mounting kit (screws, plastic bridge and shims) that should have been supplied with your order. If you follow the steps described above, I'd be surprised if the rails were still too short to properly fit in the notches.
Cheers
|
The screw holes on the blades are properly aligned with those on the pockets. The rails aren't very far short - just 2 or 3 mm. If I stretch them a little, the tips of the rails reach the notches, but when I let go, they spring back a little and pull back out of the notches.
Cheers,
Niall
