How to modify my waterway model 2 ?

[Gwaihir]

Hi fellow freedivers, I need some help,hope somebody here has som experience with this.
I just got my first monofinn from Swim.dk Shop And Im happy,The foot pocket is really tight around my bear feet,but the problem is that I need to use this all year around,and here in Norway that means that I have to wear 6mm socks.
There is no way im getting my feet into this thing with socks on. So there's the problem.
Have anybody tried modifying monofins of ca this sort ?
Shuld I cut at B or C , shuld I even touch A ? what kind of glue shuld I use,and what kind of material shuld I fill inn

-Any suggestions would be appreciated

[Erik]

I dive cold too, get cold easily, wear a 7mm suit almost all the time but only need 3mm socks, even for hours in the water. My feet don't really feel the cold.
I say go try diving with a pair of 3mm socks and see what happens- maybe it will be okay, and you wont need to cut your footpockets.
Better than cutting would be to get a bigger footpocket.

[Gwaihir]

I get cold on my feet with 6mm Mares socks in the winter, so I doubt 3mm will do.
Besides ,this Mono is a 1:1 fit.. I will not be able to use 3mm sock here.. but thanx for your input


Edit: on the other hand,this fin is "closed around the toes" so maby it will feel warmer than my bifins(omer), but still.. it wont fitt with 3mm socks..

[Erik]

Yikes. I think if you cut the footpocket, you are going to have problems as there's so much leverage at that point... I could see you ripping it open even with a good patch and glue. Even if it worked, I think you'd still have a footpocket that didn't fit properly.
Do you have the biggest size footpockets? I'd put the right footpockets on- it's not that difficult, but removing the originals might be a pain.

[Gwaihir]

It seems to be the biggest size,says the shop.. ! unbelivable,do I hav so big feet .

Got a new Idea. what if I cut left and right of A, (not along the line A) That way i woul be able to put my foot longer inside(got lots of room for toes) and the rom from ancle to heel strap would be bigger, thus making the whole thing bigger.. hmmm

[Gwaihir]

Ok. then I solved the problem my self
I did use a carpet knife,and cut around the foot,so making room for the foot to come longer inn,thus making the heelstrap "longer"

Cut carefully 3mm each time,until it fits. +I use soap to make the foot slide into place.

No all I have to do is repeat this in the sea with 1-5 C in the water,and 5 to -5 in the air... brr
I think the temperature will make it harder to flex... so maby I will not get it on.. ah well we'l see

[whucash]

Maybe instead of cutting try warming it and stretch it slowly. I've heard somewhere that people are doing this with footpockets so maybe it will work with your monofin too, it's rubber too

[Erik]

Most of us that have used monofins- especially in cold water, use soap and also put up with the tightness of the pockets. I found that with time in the fin, my feet adapted to the footpockets and were not troubled or cramped any more.
Cheers,
Erik
ps: be sure to tell everyone about your big feet

[gianpaoloc]

Probably my answer comes too late, since you already cut your footpockets, but with a friend of mine we fonnd a nice solution to cope with cold water. A solution that I think is worth sharing: we just cut the foremost part of a pair of 5mm socks, then we wear them not on our feet directly but ON TOP of the monofin footpocket, after inserting the foot, in such a way that the socks cover most of the footpockets, the feet, up to the ankles. This way very few water enters into the footpockets and the feet remain hot, even in cold water. Moreover, this also seals the feet and the soap you use to ease wearing the monofin (mine is so tight that I need soap even when wore barefoot) remains there longer.

I hope my description was clear enough and it could be of some use to others.

Ciao
G.

[Gwaihir]

I actually thought of something like that, but never actually tried it. nice to hear that it workes
Im trying the fin in the pool today,will be nice to se how it workes out,

[Gwaihir]

Oh boy this was FUN the sheer POWER when gliding trough the water was just so mutch fun.Really glad I bought the monofin now,and really looking forward to when I can bear to wear it more than 10 minutes at a time

[jome]

I would've suggested what gianpaoloc said. Too late now though I know quite a few (in addition to my self) who have tried it and it works ok. Depends a bit on the fin though.

[purple squid]

I've tried two modification on monofins:
LeaderFins.com
Finswimming equipments - WATER WAY

The first is to use lubricant:
BODYGLIDE / Prevention Is Better Than A Cure
it makes a world of difference, and it can be applied to the foot underwater

The other is to use a thin sheet of carbon composite as an insert sole: It serves two purposes: 1) its slippery to aid with insertion of the foot, and 2) it reduces the stress on the bottom of the foot where the foot pocket ends

caution:
periodically round the edges at the heel because the carbon sheets hone to be very sharp after hundreds of times coming into contact with the pool wall.

My next modification will be to attach a Waterway blade to Force Fins foot pockets
freedive_catalog
(which I really like).

See the Forcefin video (Force Fin Swim Fins click on "History of ForceFins" and go to 4:23/7:20)

Of course the best modification to a monofin is to use a hydrofoil kickboard.

[Gwaihir]

Holy moly. Anyone tried modefying theire fin like this ?
Looks comfertable though

[sanso]

Now there's an idea! I'll have to look into this. But I'm worried that the holes won't hold up to the forces that act in a footpocket.