Adjusting Sporasub One Air Trigger

[Peter Ramsay]

Hi Guys

I have been doing some more pool target testing after my last successful dive. The trigger on my One Air could do with reduction in poundage as it is a bit heavy and occasionally I pull the shot low and to the left which is a classic flinch.

I don't have the Sporasub manual handy as I am away from home at the moment but I remember it mentioning that to "increase the sensitivity" one turns the allen screw at the rear of the handle in a clockwise direction. I have three questions regarding this:
1. By "increase the sensitivity" does Sporasub mean "reducing the trigger poundage"? and
2. What is the factory default allen screw setting? From turning it fully "in" how many revolutions "out" to get to the factory default setting?
3. Any tips & tricks on setting the trigger poundage?

Many thanks in advance!

 

[popgun pete]

The sensitivity adjustment controls how far you have to pull the trigger in terms of the swing of the trigger to fire the gun. It does not reduce the poundage as such, only how long you have to pull against it before the sear releases the piston tail.

 

[Peter Ramsay]

Hi Pete many thanks for clearing up what the trigger adjustment does.