Guest viewing is limited
- You have a limited number of page views remaining
- 4 guest views remaining
- Register now to remove this limitation
-
Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:
- Join over 44,280+ fellow diving enthusiasts from around the world on this forum
- Participate in and browse from over 516,210+ posts.
- Communicate privately with other divers from around the world.
- Post your own photos or view from 7,441+ user submitted images.
- All this and much more...
You can gain access to all this absolutely free when you register for an account, so sign up today!
Aimrite trigger shape
- Thread starter Cingene
- Start date
Thread Status: Hello
, There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.
It can take a long time to get an up-to-date response or contact with relevant users.
Hi Cingene,
If you need any help with our Aimrite Trigger, let me refer you to our website where you can contact Rick Bettua, my Partner.
He handles all the mechanical and technical information about our triggers and parts. It took us two years to come up with our design, and if there is anything we can do to help let us know.
You can contact Rick at www.wongspearguns.com
Aloha, Daryl
Daryl Wong spearguns/Aimrite
If you need any help with our Aimrite Trigger, let me refer you to our website where you can contact Rick Bettua, my Partner.
He handles all the mechanical and technical information about our triggers and parts. It took us two years to come up with our design, and if there is anything we can do to help let us know.
You can contact Rick at www.wongspearguns.com
Aloha, Daryl
Daryl Wong spearguns/Aimrite
