I've been trying to glean some reviews off the trusty webernet about these fins, but have had limited success. I might have a small crush on them, but they are prohibitively pricey. Does anyone who's used them think it's worth the cost? I'm kind of a newby and really don't know what kind of fins I like because I can't afford them and don't know anyone who'll let me try theirs out. But I like having mermaid maneuverability, and don't think I like stiff blades. And clear fins are rad. I can save up and get some if they are deemed worthy. Thanks!
-
Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:
- Join over 44,280+ fellow diving enthusiasts from around the world on this forum
- Participate in and browse from over 516,210+ posts.
- Communicate privately with other divers from around the world.
- Post your own photos or view from 7,441+ user submitted images.
- All this and much more...
You can gain access to all this absolutely free when you register for an account, so sign up today!
Any feedback on Omersubs Millenium Ice fins?
- Thread starterlizms
- Start date
Thread Status: Hello
, There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.
It can take a long time to get an up-to-date response or contact with relevant users.
Well you will find mixed reports because although every one thinks they are great fins to use they have a habit of snapping in half!!!
However some guys have used icefins for years without problems, I have a pair myself.
If you use the search button you will find plenty of info on fins in general - here is a recent thread http://forums.deeperblue.com/hunting-equipment/82626-best-fins-shore-hunting.html
However some guys have used icefins for years without problems, I have a pair myself.
If you use the search button you will find plenty of info on fins in general - here is a recent thread http://forums.deeperblue.com/hunting-equipment/82626-best-fins-shore-hunting.html
Lots of stuff on the ice fins on this forum. Use the search feature and you'll find it. I know they had breakage problems in the early models of this blade but I've heard they fixed that a while back (plus they stand by the product so if it breaks they'll work with you to get you a new blade). As for the cost, I think they're overpriced for what you're getting. But they are a good fin, nonetheless. Cressi gara 3000ld is another good fin for much less money (check out leisurepro.com), that's what I use. The footpocket is not for people with really wide feet though, so just be aware of that.
If you're looking for other options check out Mako's fins, they seem like a good deal for what you're getting. But they may be a bit stiff? I'm not sure.
as above up until recently they have been notorious for snapping with the current batch (no mounting screws throught the blade) they have been VERY reliable, i have been using a pair of the current ones for almost a year now on reef and am very happy with them (short of scratches of course) if you want a pair buy a pair they are covered by a 3 year warranty and are beautiful to use.
DD
DD
Jessica Alba used them in Into the Blue [ame=http://www.youtube.com/watch?v=VZReUczASKo]YouTube - Jessica Alba - Best of "Into the blue" - uncensored[/ame] Paul Walker used the cressi gara 3000. I didn't realize she used those fins until a friend told me. At first I thought I didn't notice them because, I mean they are supposed to be invisible, but then I realized it was just beacuse I was staring so intently at her ass that I missed everythign else.
As a side note, I watch this movie during the LONG COLD WINTERS here in the Northeast and it makes me want to cry for summer diving.
As a side note, I watch this movie during the LONG COLD WINTERS here in the Northeast and it makes me want to cry for summer diving.
I broke second fin blade - remaining original fin blade - old version.
The newer version has no fixing holes as it uses a moulded in lug. However neither of my blades snapped anywhere near the original fixing holes.
Of all the fin blades I have used including current fibreglass and some carbons I prefered the Ice blades. They suited me so well and felt great. I would buy a pair tomorrow if I thought they wouldn't break. However I think they would so I wont.
Dave.
Omer guarantee the Ice for 3 years presumably because this is a known issue. Did Omer (or the supplier) replace your broken blades OMD?
BTW I read recently some positive comments about fibre glass blades (not just the one above) and then I saw some (rather half heartedly) camo'd fibre glass blades for sale (possibly on the DeeperBlue.com Shopping link) to fit my Beuchat footpockets. But they are incredibly expensive: each blade costs much more than my current fins. They appear to be just flat pieces of fibre glass - the same material as the very cheapest holiday maker fishing rods are made of - why are they so expensive, is it the small market? Carbon blades are absurd prices - you can get a good carbon fibre fishing rod for £20 these days. Ok carbon may be state of the art (although not as much so as the transparent Omer ice!) but it just isn't that new anymore.
My broken blade was replaced via Scubaland (France) where I bought it from. However it took nearly 3 months and I had phoned and emailed dozens of times, plus had to post the broken blade to a third party.
It was too much hassle. However more expensive but more customer friendly companies are replacing blades routinely. Think jonny 250 has broken 2 and had then replaced by Apnea (Jersey) no prob's.
Dave.
It was too much hassle. However more expensive but more customer friendly companies are replacing blades routinely. Think jonny 250 has broken 2 and had then replaced by Apnea (Jersey) no prob's.
Dave.
3 year warranty was no give people some trust in the product again after the earlier issues (as you can see in earlier post people dont trust them even though they are basically a different blade now) although blades dont always break at the screw holes the new ones have also from what i can see had some light chances in the making of them, maybe slight change in the chemical compound used to make the blades. reaason for Fibreglass and Carbon baldes being alot higher than fishing rods is for a range of reasons.
- economies of scale (the more made the cheaper it gets, millions of fishing rods v, hundreds of blades)
- fishing rods generlly made in third world countries labour MUCh lower,v Australian, European labour on these fins
- hand made blades which is generally the case with alot of the high end carbon
- there are alot of high fishing rods which cost alot more than blades aswell, Gloomis, Calstar, SEED, DAIWA Saltiga range to mention few.
so yes they are expensive but the performance gained when used correctly is great and if they arent worth it for you as a diver then simply stick with thermoplastic blades.
DD
- economies of scale (the more made the cheaper it gets, millions of fishing rods v, hundreds of blades)
- fishing rods generlly made in third world countries labour MUCh lower,v Australian, European labour on these fins
- hand made blades which is generally the case with alot of the high end carbon
- there are alot of high fishing rods which cost alot more than blades aswell, Gloomis, Calstar, SEED, DAIWA Saltiga range to mention few.
so yes they are expensive but the performance gained when used correctly is great and if they arent worth it for you as a diver then simply stick with thermoplastic blades.
DD
That's the thing with fins, you really don't know if they're any good for you until your try them, perhaps for an extended period
.* Actually I'm really happy with my plastic bladed Beuchat fins, they handle the abuse of spearing remarkably well - just wish they were camo or clear, or even black ("black is the new camo"TM).
*Which reminds me, a friend is going to be selling his fancy £75 SCUBA fins soon. He bought them for pool training (he has a heart re-starter which prevents him using his arms, for fear of moving the wires) but they are too soft for his needs. He's only used them a few times and has just bought some new harder ones. I suggested that he sell them on eBay and I've offered to put a link to it in the for sale section of DeeperBlue.com for him.
.* Actually I'm really happy with my plastic bladed Beuchat fins, they handle the abuse of spearing remarkably well - just wish they were camo or clear, or even black ("black is the new camo"TM).*Which reminds me, a friend is going to be selling his fancy £75 SCUBA fins soon. He bought them for pool training (he has a heart re-starter which prevents him using his arms, for fear of moving the wires) but they are too soft for his needs. He's only used them a few times and has just bought some new harder ones. I suggested that he sell them on eBay and I've offered to put a link to it in the for sale section of DeeperBlue.com for him.
Last edited:
I guess I'll know never if the performance gained is great -- as a recreational spearo, with modest depth aspirations, it probably wouldn't make much difference. Hard to imagine that it would allow me to catch enough extra fish to make it work while
.Good point about low volume businesses. BTW this talk of prices and economies of scale reminded me of this recent news story (that it happens should surprise nobody but the scale of it should surprise everyone):
Great razor rip-off: Gillette's 4,750% mark-up | This is Money
'5p razors for £2.43': Brand rip-offs, part III - This is Money Blog
'5p razors for £2.43': Brand rip-offs, part III - This is Money Blog
[You know something is amiss when Tescos starts putting what should be cheap everyday items like razor blades and condoms in large, clear plastic security boxes with big security tags attached. After all, who's robbing who in this case?
]
Last edited: