• Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:

    • Join over 44,280+ fellow diving enthusiasts from around the world on this forum
    • Participate in and browse from over 516,210+ posts.
    • Communicate privately with other divers from around the world.
    • Post your own photos or view from 7,441+ user submitted images.
    • All this and much more...

    You can gain access to all this absolutely free when you register for an account, so sign up today!

Anyone build a Suunto D3 interface?

Thread Status: Hello , There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.
I've been thinking about building one. If you figure out what the problem is let me know. Of course I had to send my mosquito in for repairs so I suspect I won't be needing a computer interface for a while :)

David aka Cragrat
cool...would this one work with the Stinger too?

if so, do you know witch connection goes to the housing and witch goes to the little "pad"?



Yes, I believe it will work for the Stinger. I would imagine that the housing would be common and the pad would be the data I/O, but don't quote me on that. During the testing of the interface, I reversed the connections on several occassions and did not do any harm to the watch, but If you don't want to take a chance, you'll have to inquire around.

Best of luck,

I've made quite a few of them.

Mine worked fine but I've been having difficulty lately - either low batteries or duff connections. Still haven't figured out which. A bit concerned to change the battery in case it loses data.

Yep - the stinger housing is the gound/common.

it doesnt look at all complicated, I expected there to be a lot more stuff to make it work...

...I dont suppose you know of any place on the internet from where I can download whatever software is needed to run it ?

thanks again