i was wondering if a single 18mm band to the 1st notch was powerfull enough. i want to add another band but i heard that the t20s are most accurate when stock so im not sure what type and how stong of a band i should add.
-
Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:
- Join over 44,280+ fellow diving enthusiasts from around the world on this forum
- Participate in and browse from over 516,210+ posts.
- Communicate privately with other divers from around the world.
- Post your own photos or view from 7,441+ user submitted images.
- All this and much more...
You can gain access to all this absolutely free when you register for an account, so sign up today!
bands on a 100cm t20
- Thread starterfindmeryan
- Start date
Thread Status: Hello
, There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.
It can take a long time to get an up-to-date response or contact with relevant users.
Hey there,
Don't worry about the accuracy, you'll get used to it. Hold the gun steady when you shoot. It will actually be more accurate farther away thanks to the extra band since the shaft will drop slower. I would use two 16's though, you might find 2 18mm's overkill...
Don't worry about the accuracy, you'll get used to it. Hold the gun steady when you shoot. It will actually be more accurate farther away thanks to the extra band since the shaft will drop slower. I would use two 16's though, you might find 2 18mm's overkill...
Mark Laboccetta said:
Which T20 you use with double 16mm? which shaft? and how is the accuracy? how much recoil?
Accurate enough for 50kg fish or accurate enough for 0.5 kg fish?
sorry with too much question, i am thinking to buy new double bands speargun
Hey Murat what's up.
Accurate enough at 15ft(4-5m) away on a 110 to shoot a 10-50kg fish. for the .5Kg fish it's better to stick to one single, because at 3-4 meters which is probably about as far as you shoot one of these smaller fish anyway the pin point accuracy given by the stable gun is important.
This is why I suggested he go to two 16mm's bands that provide more of a gradual, less "hitting" type of punch, they're smoother and have less recoil than the snappier 18's.
Mark
ps- I should have told you that on my Master America 130 that I shoot with an 8mm shaft I use three pairs of 16mm rubbers for blue water. When I shoot smaller game with that gun using a 7mm shaft I tone it down to 2 18mm's. But that gun is much heavier than a T-20 carbon or aluminum since it's wood which is why I reccomend 2 16's for those guns.
Accurate enough at 15ft(4-5m) away on a 110 to shoot a 10-50kg fish. for the .5Kg fish it's better to stick to one single, because at 3-4 meters which is probably about as far as you shoot one of these smaller fish anyway the pin point accuracy given by the stable gun is important.
This is why I suggested he go to two 16mm's bands that provide more of a gradual, less "hitting" type of punch, they're smoother and have less recoil than the snappier 18's.
Mark
ps- I should have told you that on my Master America 130 that I shoot with an 8mm shaft I use three pairs of 16mm rubbers for blue water. When I shoot smaller game with that gun using a 7mm shaft I tone it down to 2 18mm's. But that gun is much heavier than a T-20 carbon or aluminum since it's wood which is why I reccomend 2 16's for those guns.
Last edited:
what about a 18mm band to the 1st notch and a 16mm band to the 2nd you think that will work good? or might it over power then gun?
thanks for the replys
-ryan
thanks for the replys
-ryan
so what your saying murat is i shouldnt have 2 different size rubbers on my gun? either 16 and 16 or 18 and 18 (both new) but they wont strech the same amount...
Last edited:
Alison it does not matter if there is rail or not you still should have same diameer bands. Imagine if one is pulling the shaft faster than other what is use for other weaker band?
findmeryan,
yes what i meant is you should have same dimaeter bands on your gun. You can calculate the approciate length with 1/4 rule but i am not expert on band sizes of double rubber guns since i don't have any yet. You can also find suitable band length to your needs by trial and error, 1/4 rule is good place to start with and modify both of your bands at same amount.
findmeryan,
yes what i meant is you should have same dimaeter bands on your gun. You can calculate the approciate length with 1/4 rule but i am not expert on band sizes of double rubber guns since i don't have any yet. You can also find suitable band length to your needs by trial and error, 1/4 rule is good place to start with and modify both of your bands at same amount.