Good morning Sirs!
I'm looking for a experienced divers who could help me with my project.
I do the underwater maintaining of the wooden rafts. To work more efficiently I would like to use a surface supply diving device, some kind of Hookah. My plan is to create this device by myself (DIY).
Typical Hookah DIY project is just an air pomp connected with a 2nd stage regulator.
My initial idea is to improve it and connect a regulator via 11kg gas bottle charged with a compressor. So the pomp/compressor doesn't work continuously but charger the bottle when needed.
For this moment I'm looking for the information how much pressure (how many bars/atmospheres) should I provide from the bottle to comfortably breath in two scenarios:
1. I will not go deeper than 3 meters / 10 feet
2. I would like to work deeper, up to 5m / 15 feet
Thank you for the help!
Best wishes,
- Wojtulson
PS: Attaching the initial device schema ssa_device_diy.png
I'm looking for a experienced divers who could help me with my project.
I do the underwater maintaining of the wooden rafts. To work more efficiently I would like to use a surface supply diving device, some kind of Hookah. My plan is to create this device by myself (DIY).
Typical Hookah DIY project is just an air pomp connected with a 2nd stage regulator.
My initial idea is to improve it and connect a regulator via 11kg gas bottle charged with a compressor. So the pomp/compressor doesn't work continuously but charger the bottle when needed.
For this moment I'm looking for the information how much pressure (how many bars/atmospheres) should I provide from the bottle to comfortably breath in two scenarios:
1. I will not go deeper than 3 meters / 10 feet
2. I would like to work deeper, up to 5m / 15 feet
Thank you for the help!
Best wishes,
- Wojtulson
PS: Attaching the initial device schema ssa_device_diy.png