I just got a new pair of 2000HF from an online store. The end of one fin is quite warped out of shape. Does anyone know of a good way to correct this? Will the mis-shape affect performance if it can't be corrected? Thanks
-
Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:
- Join over 44,280+ fellow diving enthusiasts from around the world on this forum
- Participate in and browse from over 516,210+ posts.
- Communicate privately with other divers from around the world.
- Post your own photos or view from 7,441+ user submitted images.
- All this and much more...
You can gain access to all this absolutely free when you register for an account, so sign up today!
Thread Status: Hello
, There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.
It can take a long time to get an up-to-date response or contact with relevant users.
lay them down flat in the sun. then, when the fins are bent straight again, put them down flat in the shade.
happened to me many times. no big deal.
roland
happened to me many times. no big deal.
roland
bent HFs
Hi Feign,
I have a pair of HFs too and experience the same problem. Roland and others here at DB are right in suggesting that fins be stored flat on the ground. It's helped flatten mine out.
Regards,
Tad
Hi Feign,
I have a pair of HFs too and experience the same problem. Roland and others here at DB are right in suggesting that fins be stored flat on the ground. It's helped flatten mine out.
Regards,
Tad