• Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:

    • Join over 44,280+ fellow diving enthusiasts from around the world on this forum
    • Participate in and browse from over 516,210+ posts.
    • Communicate privately with other divers from around the world.
    • Post your own photos or view from 7,441+ user submitted images.
    • All this and much more...

    You can gain access to all this absolutely free when you register for an account, so sign up today!

CAD drawing for inner barrel Mares

Thread Status: Hello , There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.
C

caurro

Active Member
Nov 6, 2010
9
1
38
As a title I look for the CAD drawing (dvg or dxf format) of the 13 mm Mares inner barrel.
Do you know if I can find it and download it somewhere?
I need to know, exactly, the location of the holes for the hooking tooth.
Thank you in advance to those who will answer me.
Caurro
 
You will only find a drawing if someone has made themselves an inner barrel as Mares will not have released any of their engineering drawings. You can take measurements off a component if you have a dismantled gun, but why do you need it? The tubing in the correct size will be hard to source, so if you need a barrel you can buy them as spare parts.

Mares pneumatic speargun Sten/Jet Inner Barrel for underwater spearfishing | eBay

Inner barrel for Mares JET/STEN 700 code: 3180799409. Inner barrel for Mares JET 580/Ministen (580) code: 3180799404. Inner barrel for Mares JET 410/Mini ministen (410) code: 3180799409. Price for one piece.
www.ebay.com.au
 
Then to reduce the weight you will need to machine it down where there is a straight run of tubing. Basically forwards of the regulator block bulkhead and up to the muzzle nose cone bulkhead seal.
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…