• Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:

    • Join over 44,280+ fellow diving enthusiasts from around the world on this forum
    • Participate in and browse from over 516,210+ posts.
    • Communicate privately with other divers from around the world.
    • Post your own photos or view from 7,441+ user submitted images.
    • All this and much more...

    You can gain access to all this absolutely free when you register for an account, so sign up today!

carbon barrel replacement

Thread Status: Hello , There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.

BladeRunner

Mud Puddle Diver
May 20, 2002
540
14
108
48
I have a 90cm Omer Excalibur 2000 that I want to replace barrel with a carbon fiber barrel. anyone know where I can get one and have one I can buy from them that's in good condition?
 
Last edited:
The best thing is to ask forum member Mark Laboccetta (Omer importer in Usa, website www.omerdiving.com). If it's available in the Usa, it must certainly pass through Mark's warehouse.
 
Last edited:
Hi Blade Runner,

I saw your email today but what you want to do is not so simple. You can't simply switch a barrel, not to mention buying parts alone sometimes cost more than the complete gun.

The reason is the ID of the carbon guns is different than aluminum guns. As a result so are the male ends of the muzzle and handle, basically diameters of all three of these are different from aluminum guns. If you changed to a carbon barrel it wouldn't fit without modifying and shaving down the diameter of the handle and muzzle in your aluminum gun since the wall thickness of the aluminum is thinner 1,2mm compared to 1.5mm of the carbon 90cm. If then you reduce those two parts unevenly you'll risk to have a cockeyed gun.

If you are still determined to do it let me know and I'll see if I can source you a 90cm barrel, if we have one laying around. However, my suggestion is to save your money and put it toward a bigger gun where a carbon barrel is more of a worthwhile purchase. The increase in performance between an aluminum gun and a carbon gun in that length is so minimal that unless you just would like to have the "bling effect" of a carbon gun you won't hardly notice it in the water.

The overall difference in weight of the guns is in the ounces, a few, and a carbon barrel is truly only more advantageous in longer lenghths, 100-120cm, where longer Alum. guns tend to be more wrist heavy and you need a greater stiffness to weight ratio than aluminum barrels in those lengths.

Regards, Mark
 
OK thank you Mark I didn't relize it would be that different between the barrels. I was just looking to make it alittle light after adding a reel to the gun. Thank you anyway for time greatly appreciated!!!
I
 
Cookies are required to use this site. You must accept them to continue using the site. Learn more…