• Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:

    • Join over 44,280+ fellow diving enthusiasts from around the world on this forum
    • Participate in and browse from over 516,210+ posts.
    • Communicate privately with other divers from around the world.
    • Post your own photos or view from 7,441+ user submitted images.
    • All this and much more...

    You can gain access to all this absolutely free when you register for an account, so sign up today!

cressi gara 3000 ld or OMER millenium

Thread Status: Hello , There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.
C

capitangoku

Guest
People, I need some advice. For the past ten years I've been using my Scubapro Jetfins for everything. From SCUBA to spearfishing. Now that I've notice that people with freediving fins have some advantages when spearfishing, I want some new fins. I have two options for my budget: The Cressi gara 3000 fins (LD or HF) or the OMER millenium fins. I know that you can change the omer fin blade and the Cressi fins are on e full piece, which could be a con or a pro. Please advice me!

GOKU :head
 
They're both decent fins, but the advantage goes to OMER because someday you will want to upgrade the blades.
 
I'd suggest trying the footpockets. At that level it's a close choice - though Erik is right about the upgrade options.
 
I'd say: go for those that fit best for Your foot and Your legs (stiffness) Being able to change a blade will only be worth it if the foot pocket actually fits You well.
If You have the opportunity, try each and every one of them on - from buddies or in a shop. Then decide. - I'd like to be able to give You a simpler answer for Your ideal fin, but I think You'll have to mull this over... There are several threads on this topic, so if You do a search You'll find more opinions on this.

HTH
 
Maybe this could be somewhat helpful to you...

1. [FONT=Arial,Helvetica]c4[/FONT] [FONT=Arial,Helvetica]Mustang 80 apnea[/FONT]
[FONT=Arial,Helvetica]2. c4[/FONT] [FONT=Arial,Helvetica]Falcon 30 [/FONT]
3. [FONT=Arial,Helvetica]Cressi[/FONT] [FONT=Arial,Helvetica]GARA 2000 HF[/FONT]
4. [FONT=Arial,Helvetica]Cressi[/FONT] [FONT=Arial,Helvetica]GARA 3000[/FONT][FONT=Arial,Helvetica]
5. Cressi[/FONT] [FONT=Arial,Helvetica]GARA 3000 LD[/FONT]
6. [FONT=Arial,Helvetica]OMER[/FONT] [FONT=Arial,Helvetica]Millenium ICE[/FONT]
7. [FONT=Arial,Helvetica]OMER[/FONT] [FONT=Arial,Helvetica]Millenium black neu[/FONT]
8. [FONT=Arial,Helvetica]OMER[/FONT] [FONT=Arial,Helvetica]Millenium Runner[/FONT]
9. [FONT=Arial,Helvetica]Beuchat[/FONT] [FONT=Arial,Helvetica]Mundial Sport[/FONT]
10.[FONT=Arial,Helvetica]Beuchat[/FONT][FONT=Arial,Helvetica] Mundial Competition[/FONT]
[FONT=Arial,Helvetica]
shoe size[/FONT][FONT=Arial,Helvetica] 1. 41/42[/FONT] 2. [FONT=Arial,Helvetica]42/44[/FONT] 3. [FONT=Arial,Helvetica]42/43[/FONT] 4. [FONT=Arial,Helvetica]42/43[/FONT] 5. [FONT=Arial,Helvetica]42/43[/FONT] 6. [FONT=Arial,Helvetica]42/44[/FONT] 7. [FONT=Arial,Helvetica]42/44[/FONT] 8. [FONT=Arial,Helvetica]42/44[/FONT] 9. [FONT=Arial,Helvetica]41/42[/FONT] 10. [FONT=Arial,Helvetica]41/42[/FONT] [FONT=Arial,Helvetica]
length overall[/FONT][FONT=Arial,Helvetica] in mm 1. 910[/FONT] 2. [FONT=Arial,Helvetica]900[/FONT] 3. [FONT=Arial,Helvetica]855[/FONT] 4. [FONT=Arial,Helvetica]890[/FONT] 5. [FONT=Arial,Helvetica]890[/FONT] 6. [FONT=Arial,Helvetica]880[/FONT] 7. [FONT=Arial,Helvetica]875[/FONT] 8. [FONT=Arial,Helvetica]875[/FONT] 9. [FONT=Arial,Helvetica]880[/FONT] 10. [FONT=Arial,Helvetica]890[/FONT] [FONT=Arial,Helvetica]
length of blade[/FONT][FONT=Arial,Helvetica] in mm 1. 620[/FONT] 2. [FONT=Arial,Helvetica]620[/FONT] 3. [FONT=Arial,Helvetica]580[/FONT] 4. [FONT=Arial,Helvetica]615[/FONT] 5. [FONT=Arial,Helvetica]615[/FONT] 6. [FONT=Arial,Helvetica]590[/FONT] 7. [FONT=Arial,Helvetica]580[/FONT] 8. [FONT=Arial,Helvetica]580[/FONT] 9. [FONT=Arial,Helvetica]600[/FONT] 10. [FONT=Arial,Helvetica]600[/FONT] [FONT=Arial,Helvetica]
width[/FONT] [FONT=Arial,Helvetica]in mm 1. 190[/FONT] 2. [FONT=Arial,Helvetica]190[/FONT] 3. [FONT=Arial,Helvetica]216[/FONT] 4. [FONT=Arial,Helvetica]212[/FONT] 5[FONT=Arial,Helvetica]. 212[/FONT] 6. [FONT=Arial,Helvetica]220[/FONT] 7. [FONT=Arial,Helvetica]218[/FONT] [FONT=Arial,Helvetica]8. 218[/FONT] 9. [FONT=Arial,Helvetica]220[/FONT] 10. [FONT=Arial,Helvetica]220[/FONT] [FONT=Arial,Helvetica]
weight[/FONT] [FONT=Arial,Helvetica]in kg 1. 1,10[/FONT] 2. [FONT=Arial,Helvetica]1,05[/FONT] 3. [FONT=Arial,Helvetica]0,91[/FONT] 4. [FONT=Arial,Helvetica]0,97[/FONT] 5. [FONT=Arial,Helvetica]0,97[/FONT] 6. [FONT=Arial,Helvetica]1,07[/FONT] 7. [FONT=Arial,Helvetica]1,35[/FONT] 8. [FONT=Arial,Helvetica]1,27[/FONT] 9. [FONT=Arial,Helvetica]1,08[/FONT] 10. [FONT=Arial,Helvetica]1,10[/FONT] [FONT=Arial,Helvetica]
bending with 1kg of weight at the end of blade[/FONT][FONT=Arial,Helvetica] 1. 370 [/FONT] 2. [FONT=Arial,Helvetica]230[/FONT] 3. [FONT=Arial,Helvetica]140[/FONT] 4. [FONT=Arial,Helvetica]185[/FONT] 5. [FONT=Arial,Helvetica]230[/FONT] 6. [FONT=Arial,Helvetica]190[/FONT] 7. [FONT=Arial,Helvetica]140[/FONT] 8. [FONT=Arial,Helvetica]170[/FONT] 9. [FONT=Arial,Helvetica]190[/FONT] 10. [FONT=Arial,Helvetica]180[/FONT] [FONT=Arial,Helvetica]
thickness at the end of blade[/FONT] [FONT=Arial,Helvetica]in mm 1. 0,8[/FONT] 2. [FONT=Arial,Helvetica]0,8[/FONT] 3. [FONT=Arial,Helvetica]3/2[/FONT] 4. [FONT=Arial,Helvetica]2,6[/FONT] 5. [FONT=Arial,Helvetica]2,6[/FONT] 6. [FONT=Arial,Helvetica]2,4[/FONT] 7. [FONT=Arial,Helvetica]2,7[/FONT] 8. [FONT=Arial,Helvetica]2,5[/FONT] 9. [FONT=Arial,Helvetica]2,0[/FONT] 10. [FONT=Arial,Helvetica]2,2[/FONT] [FONT=Arial,Helvetica]
blade exchangeable[/FONT] [FONT=Arial,Helvetica]1. yes 2. yes 3. no 4. no 5. no 6. yes. 7. yes 8. yes 9. yes 10. yes[/FONT] [FONT=Arial,Helvetica]
color[/FONT] [FONT=Arial,Helvetica]1. black [/FONT] 2. [FONT=Arial,Helvetica]black[/FONT] 3. [FONT=Arial,Helvetica]black[/FONT] 4. [FONT=Arial,Helvetica]black[/FONT] [FONT=Arial,Helvetica]5. grey[/FONT] 6. clear[FONT=Arial,Helvetica] 7. black, green[/FONT][FONT=Arial,Helvetica] 8. black[/FONT] 9. [FONT=Arial,Helvetica]grey[/FONT] 10. [FONT=Arial,Helvetica]black[/FONT] [FONT=Arial,Helvetica]
material of blade [/FONT][FONT=Arial,Helvetica]1. Carbon Laminat[/FONT] 2. [FONT=Arial,Helvetica]Carbon Laminat[/FONT] 3. [FONT=Arial,Helvetica]Polypropylen[/FONT] 4. [FONT=Arial,Helvetica]Polypropylen[/FONT] 5. [FONT=Arial,Helvetica]Polypropylen[/FONT] 6. [FONT=Arial,Helvetica]POM seethrough thermoplastic Polymer-Plastic[/FONT] [FONT=Arial,Helvetica]7. POM thermoplastic Polymer-Plastic[/FONT] [FONT=Arial,Helvetica]8. POM thermoplastic Polymer-Plastic[/FONT] [FONT=Arial,Helvetica]9. Polypropylen[/FONT] 10. [FONT=Arial,Helvetica]Polypropylen[/FONT]

I translated this table from German, so please excuse if some materials are not correctly spelled. I think you get the idea though...
 
Last edited:
Actually, I had it set up like a table, meaning in rows and colums, but it turned out like this.

Well, it takes a little more effort but I think you can read the information given.
 
Will you be using these for scuba too? If so I reckon the hf version of the cressis would be better
 
Well, I have my scubapro Jetfins, which are like 20 year old (were from my father) but the work better than any other fin I have ever worn. I use 'em for scuba diving, but many people had told me that for the kind of sports I do, I will need spearfishing fins. I've been Scuba diving since 12, and spearfishing since 16 and theese fins had been my partners.
Usually I spend several hours in the water (4 to 6), because I don't have a boat. Therefore I travel long distances, and get very tired after that. Many local spearos have told me that with the same effort I apply to my scuba fins, I can get double or triple the effect with freediving fins. But my budget is a little limited, because I'm a student and the very best for the price that I've seen are OMER and CRESSI.

Hope this description helps you to advise me!
 
Long distances? I say forget the hf's
I'd say go with the Millenniums then as they are very comfortable over long periods (I dive similar times with them). Also they offer upgrade-ability for future blades and excellent back up provided by Omer
 
I have both. My beef with the OMERS is that the "mouth" of the footpockets is like, well, gaping open.. It leads to too much space around the heel. This seems to be their design, and many complain of loose heels with OMERS.

Having said that, I use my omer milenium runners (black) most weekends when my legs are feeling in shape because they are more powerful than the Cressis IMHO. My heel wobbles around a bit though ......
 
I just got my garas today and will be putting them to the test 2moro after work so will post my "results" after the dive.
 
well scot, I'll be waiting for you rating!
Thanks for anwering to my post people!

Christian, Puerto Rico
 
gara 2000 HF are ver good...but for long distance swimming to a dive spot it's a bit hard.
foot pocket fits best for me.
 
10/10 for the gara 3000. loverly fin. very well made and a nice fit, they are a slimmer pocket though but still very comftable.

I covered a fair amount of ground with them and they werent hard on the legs. will give them a good going this weekend but i put my money on the gara's
 
I love my Garas too, however once you get into a fiberglass or carbon fin, you realise how superior they are. Something to consider for the future.
 
I have both the omer milleniums and picasso black teams. Both are very nice fins, but the black team foot pockets are more comfortable to me, as I have a wide foot. Just something else to consider, if you have a wide foot.
 
Erik said:
I love my Garas too, however once you get into a fiberglass or carbon fin, you realise how superior they are. Something to consider for the future.
Click to expand...

Apologies for the novice question, but can you elaborate on this? Are carbon and fiberglass more powerful, easier on the legs, more durable...?
 
Carbon and glass fins are much lighter and take less effort to physically move around with your legs. They also have a sort of rapid memory (snap). Imagine as you power down with your leg the fin blade bends upwards with the water resistance. With a plastic fin the blade slowly straightens out but a fibre fin will flick itself straight and provide a little extra thrust.
 
I started with the Picasso Black Teams and love them, they really take a beating because most of my dives are from the shore over coral and they hold us really well. Plus when the plastic blades wear out you can upgrade them.
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…