Twin Lock
Decompression chamber New!!!
For Sale!!!
54 inch (1372mm) chamber.
I can custom build you larger sizes.
This chamber has been designed for treatment of Decompression Sickness (The Bends) commonly found among divers.,
Built to AMSE/PVHO-1 Certification Standards. Meets US Coast Guard requirements. Can be designed to meet other requiremments like IMCA,DNV, etc...
This chamber has been tested and certified to pressures up to 10x atmospheric pressure.
Meets OSHA 29CFR-1910 & USCG 46CFR-197 requirements,
Complete Documentation Package provided National Board Registered. BUILT BY AN ISO-9001 Quality Certified Fabricator. AVAILABLE IN STANDARD 54" .
CUSTOM SIZES AVAILABLE ON REQUEST.
Weight 5515 lbs (2507kg)
Length 155" (3937mm)
diameter 55" (1397mm)
Height 76" (1930mm)
Double lock Doors (one outside chamber & one on inner chamber)
The Double door entry lock permits a physician or attendant to enter or leave the system during treatment, allowing for treatment of acute patients.
The optional medical lock is a convenient way to pass refreshments or medical supplies in and out of the system.
The Chamber is designed with:
(2 each) 30" {762mm}Manways with shipping dogs for doors
(4 each) 8" {203mm} viewports (1 in entrance, 3 in main lock)
(23 each) Stainless steel penetrators (NPT)
Heavy "I" beam skid with forklift slots
Lifting Lugs for crane handling
Painted inside & out with epoxy over Zinc primer
Aluminum Deck plates
The Standard Equipped Chamber Consists of:
(2 each) 6" 0-225 fsw 0.5% accuracy depth gauges
(1 each )2.5" inlet pressure gauge
(3 each) Sound power phones ***1 phone on outside , 1 phone for the inner & 1 phone for the outer chamber
Wiring for connecting 2 each Paging speakers to a radio system (intercom system)
***Note: radio (intercom system) & speakers are not included. only wiring is there.
(2 each) Pressure rated electrical penetrators
Extra Heavy Brass plumbing for Pressurization & Exhaust
Aluminum side cover & deck plates
plumbing connections that allows a BIB (built in breather) mask to be connected to a Oxigen tank outside the chamber
Drain valves each lock
Silencers inside and out
AVAILABLE OPTIONS:
Note: Below items are extra cost and optional items that we can include in the chamber
BIB (built in breather) masks Standard & Overboard Dump
Radio (intercom) for paging system
Bunk/Mattress
Chamber & Bunk Lights
Cassion Gauges
CO-2 Scrubber
Medical Lock
***The optional medical lock is a convenient way to pass refreshments and medical supplies in and out of the system.
Stainless overlay or Nickel plated sealing surfaces
Viewport covers
Bottle rack
Custom outfitting
Air compressor
volume tank
Fire Extinguisher
I accept payment by Certified Funds, paypal and bank Electronic Transfer.
Email for price , photos and info:
Sierrainternational@rediffmail.com
Decompression chamber New!!!
For Sale!!!
54 inch (1372mm) chamber.
I can custom build you larger sizes.
This chamber has been designed for treatment of Decompression Sickness (The Bends) commonly found among divers.,
Built to AMSE/PVHO-1 Certification Standards. Meets US Coast Guard requirements. Can be designed to meet other requiremments like IMCA,DNV, etc...
This chamber has been tested and certified to pressures up to 10x atmospheric pressure.
Meets OSHA 29CFR-1910 & USCG 46CFR-197 requirements,
Complete Documentation Package provided National Board Registered. BUILT BY AN ISO-9001 Quality Certified Fabricator. AVAILABLE IN STANDARD 54" .
CUSTOM SIZES AVAILABLE ON REQUEST.
Weight 5515 lbs (2507kg)
Length 155" (3937mm)
diameter 55" (1397mm)
Height 76" (1930mm)
Double lock Doors (one outside chamber & one on inner chamber)
The Double door entry lock permits a physician or attendant to enter or leave the system during treatment, allowing for treatment of acute patients.
The optional medical lock is a convenient way to pass refreshments or medical supplies in and out of the system.
The Chamber is designed with:
(2 each) 30" {762mm}Manways with shipping dogs for doors
(4 each) 8" {203mm} viewports (1 in entrance, 3 in main lock)
(23 each) Stainless steel penetrators (NPT)
Heavy "I" beam skid with forklift slots
Lifting Lugs for crane handling
Painted inside & out with epoxy over Zinc primer
Aluminum Deck plates
The Standard Equipped Chamber Consists of:
(2 each) 6" 0-225 fsw 0.5% accuracy depth gauges
(1 each )2.5" inlet pressure gauge
(3 each) Sound power phones ***1 phone on outside , 1 phone for the inner & 1 phone for the outer chamber
Wiring for connecting 2 each Paging speakers to a radio system (intercom system)
***Note: radio (intercom system) & speakers are not included. only wiring is there.
(2 each) Pressure rated electrical penetrators
Extra Heavy Brass plumbing for Pressurization & Exhaust
Aluminum side cover & deck plates
plumbing connections that allows a BIB (built in breather) mask to be connected to a Oxigen tank outside the chamber
Drain valves each lock
Silencers inside and out
AVAILABLE OPTIONS:
Note: Below items are extra cost and optional items that we can include in the chamber
BIB (built in breather) masks Standard & Overboard Dump
Radio (intercom) for paging system
Bunk/Mattress
Chamber & Bunk Lights
Cassion Gauges
CO-2 Scrubber
Medical Lock
***The optional medical lock is a convenient way to pass refreshments and medical supplies in and out of the system.
Stainless overlay or Nickel plated sealing surfaces
Viewport covers
Bottle rack
Custom outfitting
Air compressor
volume tank
Fire Extinguisher
I accept payment by Certified Funds, paypal and bank Electronic Transfer.
Email for price , photos and info:
Sierrainternational@rediffmail.com
Attachments
Last edited: