• Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:

    • Join over 44,280+ fellow diving enthusiasts from around the world on this forum
    • Participate in and browse from over 516,210+ posts.
    • Communicate privately with other divers from around the world.
    • Post your own photos or view from 7,441+ user submitted images.
    • All this and much more...

    You can gain access to all this absolutely free when you register for an account, so sign up today!

Dynema Wishbones

Thread Status: Hello , There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.

glowworm

Supporter
Supporter
May 4, 2005
1,239
397
138
50
I want to convert from an articulated wishbone to dynema.My gun is rigged with dynema instead of mono and i am a real convert.After 1 shots incident that led to his articulated wishbone breaking and doing horrible damage to the rubbers i don't want that to be my fingers.

Now i would like advice on which size dynema,crimps and a good crimping tool.
Any pictures showing how it's done would be great.

This is the gun i wish to convert
 
Last edited:
Ciao Glowworm, been missing you here on DB! Hope all is well with you.
Now the "how to" thing couldn't be any better than this Medfish Pau thread which is very very clear with good pics for each step:
Mediterranean Fishing :: Log in

I'm quite sure it will help a lot.
Cheers,
Spag
 
Reactions: glowworm and foxfish
glow, i have a slightly different suggestion for you to consider, instead of using dynema as shooting line try monofilament, in my opinion its much better, get the 1.6mm mono from spetton and the spetton crimps, you will also need a crimping tool (all three of these items are sold at subprof.com) I would imagine that dave (spearo.co.uk) would also have a similar solution..
for the wishbone, picasso sells dynema wishbones that would directly fit on threaded bands (no tools needed), they also sell that at subprof.com..
i would recommend a third option try the beuchat tahiti wishbone (also sold at subprof) this is my favourite, its metal so engages the spear notches very well, its not articulated (no hinges), its not sharp (i could easily grip it when loading), its also designed in a way that when loaded, it keeps the bands slightly to the sides so you easily remove your fingers out of the way...i find this the safest and most reliable option...
best of luck
 
Thanks for the tips chaps.

Marwan i used to have all my guns strung with mono but i found the mono had a memory of where they bent around the muzzle and this caused weak spots and breakages.I have seen the dynema wishbones from Picasso so i might try them as well.I still need to get some dynema and crimps plus tool for my spare spears.

Spaghetti once again you come up trumps with good information.
 
Mawan, for many years I used dynema as my running line before converting my guns to mono however I have been thinking about changeing a gun back to braid. I dont seem to remember haveing so many tangles with dynema!
 
Reactions: spaghetti
A good point Foxfish i've never had any tangles with dynema.I'm not too sure about braid though as it has no strech so even with a bungee it could snap under the force of the dark side:martial
 
Reactions: spaghetti
"...I used to have all my guns strung with mono but i found the mono had a memory of where they bent around the muzzle and this caused weak spots and breakages..." Gloworm

Just to satisfy my own curiousity, what size/strength mono did you use?
 
well i tried the dynema route on shooting lines, it used to get chaffed up on the spear hole where you tie it up, to the extent that the line once broke as i shot and the spear could have hit someone... i also find the thin dynema harder to handle underwater especially with gloves...my C4 was rigged with dynema and i didnt like it i switched to mono. i do acknowledge the points about memory and breakages,but i never got to experience it with the 1.6 or 2.2mm dynema ( which i normally use), maybe on the thinner ones...
cheers
 
Bill i can't remember what size or strength as the guns were rigged by my local dive shop at the time with kits that were Cressi.

The guns are a 75cm and a 90cm abd i even had to modify the muzzle of the 75 to allow the line to sit in properly.
 
on the wishbone part, i think that the picasso could be a good solution, i'm not sue if the standard euro spears would chaff it up or would you need to maybe file the notches a bit to make them smoother, i still feel the beuchat tahiti is the safest choice from all the wishbnes i tried
 
Marwan i think your right about the picasso wishbones.I'm quite lucky with the quality of the Dassault spear as it is top quality.
 
So for the guys who do use dynema to string their guns what size is preferable?
 
glowworm said:
So for the guys who do use dynema to string their guns what size is preferable?
Click to expand...

As a dyneema wishbone: 2 or 3 millimeters (and why not a double loop. and don't forget to file the notches of the shaft).
As a shaft/reel line 1,5/3mm, depends on terrain, type of hunting, power of the gun. A thicker line can affect negatively the accuracy, a thinner line can get cut on rocks or break under fish reaction et cetera.
 
I use 3 mm Spectra core (dynema) wishbones and like them very much. They outlast the rubber for sure.

I just use a single overhand knot in the end, and use a constrictor knot in the whipping twine, and they never pull out.
 

Attachments

  • bandtiesupplies.JPG
    88.4 KB · Views: 223
  • 3colorwishbones.JPG
    89.3 KB · Views: 203
Reactions: spaghetti
OK so what about crimping dynema? Will they cut through any faster than mono?
 
I always tie my dynema spearline .For your wishbone get some of those small ball sinkers that have a little hole in them and put the line through the hole and tie a plain knot. Do they still make your gun and if they do were did you get it.
 
I don't think you should crimp any fiber line, including dyneema.
 
Coral Sniper i brought my gun from a shop called Mio Palmo in the south of france on the internet.A great gun very very accurate..

I think i will have to try a session of tying spears with dynema and mono with crimps and test firing underwater to see if there is any damage..
 
Speargun

I have been looking for a gun like that for a long time. Just like the black viper but with better quality. Thanks for the websites guys
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…