I need some help with my first speargun. Its a liminated gun it has 5 lams of mahogany in the middle and 1 lam of teak on each side. I used water proof wood glue from lowes to laminate. What kind of finish should I put on the gun teak oil or epoxy? I was wondering is the 2 part epoxy from wal-mart, the one that looks like two syringes hooked together is it the same thing as west systems epoxy or will it do as good of a job. Any advice will help. thanx
-
Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:
- Join over 44,280+ fellow diving enthusiasts from around the world on this forum
- Participate in and browse from over 516,210+ posts.
- Communicate privately with other divers from around the world.
- Post your own photos or view from 7,441+ user submitted images.
- All this and much more...
You can gain access to all this absolutely free when you register for an account, so sign up today!
first homemade speargun
- Thread starterC3X
- Start date
Thread Status: Hello
, There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.
It can take a long time to get an up-to-date response or contact with relevant users.
Hi & welcome to db - look here for a start http://forums.deeperblue.com/diy-homemade/85870-clear-coatings-what-you-use.html