Hellow my friends.
Here is a mount which I made from sainless steel to my mares phantom fv 75.
The mount made for my new go pro hd camera.
Underneath the mount I put a thick rubber which I cute from track inner tube{I that this is the correct name of the thing which located inside the track tire}.
I didn’t drill in the speargun.
I used in the hollow triangle.
On the stainless steel screw I put silkicone tubes which I took from the aquarium air pump to protect the speargun and to improve the stability of the mount.
The nut are with naylock system so they are not going to be loose during the time.
The camera itself connected to the mount with the go pro tripot mount.
The camera could swing around while diving so to prevent it I put a thick layer of rubber{as I used before}between the mount and the go pro tripod mount.
It function like a naylock nut and ensure that the camera will not swing…
Have fun;
avinoam
Here is a mount which I made from sainless steel to my mares phantom fv 75.
The mount made for my new go pro hd camera.
Underneath the mount I put a thick rubber which I cute from track inner tube{I that this is the correct name of the thing which located inside the track tire}.
I didn’t drill in the speargun.
I used in the hollow triangle.
On the stainless steel screw I put silkicone tubes which I took from the aquarium air pump to protect the speargun and to improve the stability of the mount.
The nut are with naylock system so they are not going to be loose during the time.
The camera itself connected to the mount with the go pro tripot mount.
The camera could swing around while diving so to prevent it I put a thick layer of rubber{as I used before}between the mount and the go pro tripod mount.
It function like a naylock nut and ensure that the camera will not swing…
Have fun;
avinoam