• Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:

    • Join over 44,280+ fellow diving enthusiasts from around the world on this forum
    • Participate in and browse from over 516,210+ posts.
    • Communicate privately with other divers from around the world.
    • Post your own photos or view from 7,441+ user submitted images.
    • All this and much more...

    You can gain access to all this absolutely free when you register for an account, so sign up today!

For Sale Gun Builders: MAKO Double Roller Mech - Euro

Thread Status: Hello , There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.
Mar 22, 2009
782
238
148
DOUBLE ROLLER EURO SPEARGUN REVERSE TRIGGER MECHANISM

https://www.makospearguns.com/Double-Roller-Euro-Speargun-Trigger-Mechanism-p/mdretm.htm

Introduction Price of just $69.95


The MAKO Double Roller Speargun Reverse Trigger Mechanism is the smoothest and most advanced trigger mechanism ever made.

MDRETM-2T.jpg


Using patented technology and produced to our exact specifications by Ermes Sub of Italy, this mech has two rollers that act like wheels to eliminate friction and deliver the smoothest spear release possible, resulting dramatically enhanced accuracy.

The patented double roller design uses one roller wheel at the "trigger to sear" contact point and another roller/wheel at the "sear to spear" contact point.

TWO MAIN ADVANTAGES:
The elimination of friction at these contact points eliminates “galling” commonly found on standard reverse trigger mechanisms. “Galling” is the scratching and marring of the metal surfaces of the trigger, sear and spear caused by repeated contact between two metal surfaces, eg trigger to sear and sear to spear. This “galling” which occurs on standard reverse trigger mechanisms, causes inconsistent trigger pulls, resulting in a loss of accuracy, missed shots, and gets worse over time.

The shaft is more stable and true as it exits the mechanism. This is because the back roller (sear to spear) actually falls down and the spear rolls over the back roller instead of the speed bump effect as seen on regular mechanisms. This makes the shaft exit the mechanism with much more stability, which of course means higher performance, more accuracy and more penetration.

Features include:
100% Stainless steel trigger, line release, sear and twin rollers
Machined to exacting standards
Selectable left or right hand line release
Auto resetting line release
Polished stainless steel
Double rollers eliminate friction for a smooth release
Works on all euro spears
Mech can easily handle 3 (tight) 16-mm bands
Fits trigger pocket cut with standard 19/32 router bit
Includes: Two 2" long mech pins


double-roller-euro-speargun-trigger-mechanism.jpg
 
DeeperBlue.com - The Worlds Largest Community Dedicated To Freediving, Scuba Diving and Spearfishing

ABOUT US

ISSN 1469-865X | Copyright © 1996 - 2024 deeperblue.net limited.

DeeperBlue.com is the World's Largest Community dedicated to Freediving, Scuba Diving, Ocean Advocacy and Diving Travel.

We've been dedicated to bringing you the freshest news, features and discussions from around the underwater world since 1996.

ADVERT