• Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:

    • Join over 44,280+ fellow diving enthusiasts from around the world on this forum
    • Participate in and browse from over 516,210+ posts.
    • Communicate privately with other divers from around the world.
    • Post your own photos or view from 7,441+ user submitted images.
    • All this and much more...

    You can gain access to all this absolutely free when you register for an account, so sign up today!

loading my gun

Thread Status: Hello , There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.
willloomy

willloomy

Well-Known Member
May 7, 2008
199
23
58
i just tested out my home made spear gun for the first time today. i was having quite a few problems loading the gun. my gun kept slipping down my chest when i put to much pressure on the bands. this was partial solved by putting a wetsuit vest on. but it still slipped a few times. i have a pretty long gun (53 inches) and i am having trouble bracing it on my chest. I got some pretty bad bruses from loading it today and tips or a modification i can do to my gun the make the loading easer.
 
try hip loading if you cant load it on your chest. I usually wedge my gun on my weight belt buckle to keep it from slipping.

The only other thing would be to wear a vest or suit. If you keep getting bruises you can add a layer of neoprene to your vest or us a rubber slipper inside your top.
 
you could try putting a non-slip pad on your wetsuit. use the same kind that they put on bathtubs.
 
You could also put a soft pad on the end of the gun but to help with the bruises.
 
How many bands do you have to load?
A 53'' gun is a very long gun but if you use metal wishbones there is an adapter available where a rod is inserted in the actual wishbone thus considerably shorting the reach.
 
i have 3 bands the shortest is 20 inches long yesterday i have chord wishbones. the length of the bands is not really a problem its just hard to get the gun butt to my chest but i putt a slipper under a wetsuit vest and it was much better.
 
hipload it that's not too large of a gun. I hipload my 110cm rabitech with short 20mm band and I'm no chuck norris...:)
 
uhm if nothing works try having a rest tab (cheater tab; a notch or sharkfin halfway on your shaft) on your shaft that way you can hip load it up to the rest tab and then chest load to the main notch/sharkfin. that`s what i did with my selfmade eurotype speargun and i have no problem eversince. hope this helps, safe diving/spearing :)
 
You must log in or register to reply here.
DeeperBlue.com - The Worlds Largest Community Dedicated To Freediving, Scuba Diving and Spearfishing

ABOUT US

ISSN 1469-865X | Copyright © 1996 - 2024 deeperblue.net limited.

DeeperBlue.com is the World's Largest Community dedicated to Freediving, Scuba Diving, Ocean Advocacy and Diving Travel.

We've been dedicated to bringing you the freshest news, features and discussions from around the underwater world since 1996.

ADVERT

Community platform by XenForo® © 2010-2023 XenForo Ltd.
Top Bottom
Back