I have a Mares M1 RGBM computer and was wondering if anyone knows if you can use the standard IR port on a PC to download the logs to the IRIS application.
-
Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:
- Join over 44,280+ fellow diving enthusiasts from around the world on this forum
- Participate in and browse from over 516,210+ posts.
- Communicate privately with other divers from around the world.
- Post your own photos or view from 7,441+ user submitted images.
- All this and much more...
You can gain access to all this absolutely free when you register for an account, so sign up today!
Mares Computers & PC Infrared
- Thread starterscubaman81
- Start date
Thread Status: Hello
, There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.
It can take a long time to get an up-to-date response or contact with relevant users.
Scubaman,
It is my understanding you cannot use a standard infared reader from a computer. I am not a computer teckie, but I've read other posts from people that have tried. Some have built their own although it didn't sound that easy. We have a new Iris download hardware w/ USB connector, just recently launched. Retail is about $120. Software is downloadable from the Mares website.
Best,
It is my understanding you cannot use a standard infared reader from a computer. I am not a computer teckie, but I've read other posts from people that have tried. Some have built their own although it didn't sound that easy. We have a new Iris download hardware w/ USB connector, just recently launched. Retail is about $120. Software is downloadable from the Mares website.
Best,
Zak
Thanks for the info, I have downloaded the software already, do you know if some one has instructions on building one? I am and electronics engineer so if someone know the components i could knock one up, and maybe do them for others as well if they wanted them.
Thanks
Kevin.
Thanks for the info, I have downloaded the software already, do you know if some one has instructions on building one? I am and electronics engineer so if someone know the components i could knock one up, and maybe do them for others as well if they wanted them.
Thanks
Kevin.
Try this, I think this is what you are looking for. When I read it, it is like a foreign language. 
ScubaBoard - DIY Mares InfraRed Cable for AirLab/M1/Dacor Darwin -- Works!
Hope this helps.
Zak
ScubaBoard - DIY Mares InfraRed Cable for AirLab/M1/Dacor Darwin -- Works! Hope this helps.
Zak
Please let me know your results. I'm pretty handy with a soldering iron too, but couldn't find all the components in the referenced circuit (the IR diodes that he recycled from an old remote). Thanks!