Mares Spark Mimetic

[Armis]

I've owned Mares spark mimetic 55. According instruction, this gun should be overhauled every 2 years (I think this time depends on how often you use the gun :t ) and of course oil replacement should be carried out. I'd like to know which oil I can use - special for pneumo-spearguns or simply I can put just silicone liquid? And quantity to refill ? Thanks

 

[GreekDiver]

I've owned Mares spark mimetic 55. According instruction, this gun should be overhauled every 2 years (I think this time depends on how often you use the gun :t ) and of course oil replacement should be carried out. I'd like to know which oil I can use - special for pneumo-spearguns or simply I can put just silicone liquid? And quantity to refill ? Thanks

Remove air from gun
Remove muzzle and then piston.
Check the piston oring - you can change that if you want but leave it if it works
Add about 20ml of fork oil 5w to 10w whichever one you can find.
Put gun back together.

 

[Armis]

Remove air from gun
Remove muzzle and then piston.
Check the piston oring - you can change that if you want but leave it if it works
Add about 20ml of fork oil 5w to 10w whichever one you can find.
Put gun back together.

Thanks a lot !

 

[Armis]

Do anyone have the sketch or drawing with all dimmensions for how to make adaptor for pressure gauge (to meassure actual pressure in speargun's tank)? I'm in the middle of North Sea and can't reach my gun ... There is time and possibilities to make this adaptor myself.