• Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:

    • Join over 44,280+ fellow diving enthusiasts from around the world on this forum
    • Participate in and browse from over 516,210+ posts.
    • Communicate privately with other divers from around the world.
    • Post your own photos or view from 7,441+ user submitted images.
    • All this and much more...

    You can gain access to all this absolutely free when you register for an account, so sign up today!

Mares Spark Mimetic

Thread Status: Hello , There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.

Armis

www.freediving.lt
Jul 4, 2008
16
2
0
50
I've owned Mares spark mimetic 55. According instruction, this gun should be overhauled every 2 years (I think this time depends on how often you use the gun :t ) and of course oil replacement should be carried out. I'd like to know which oil I can use - special for pneumo-spearguns or simply I can put just silicone liquid? And quantity to refill ? Thanks
 

Remove air from gun
Remove muzzle and then piston.
Check the piston oring - you can change that if you want but leave it if it works
Add about 20ml of fork oil 5w to 10w whichever one you can find.
Put gun back together.
 
Remove air from gun
Remove muzzle and then piston.
Check the piston oring - you can change that if you want but leave it if it works
Add about 20ml of fork oil 5w to 10w whichever one you can find.
Put gun back together.
Thanks a lot !
 
Do anyone have the sketch or drawing with all dimmensions for how to make adaptor for pressure gauge (to meassure actual pressure in speargun's tank)? I'm in the middle of North Sea and can't reach my gun ... There is time and possibilities to make this adaptor myself.
 
Cookies are required to use this site. You must accept them to continue using the site. Learn more…