• Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:

    • Join over 44,280+ fellow diving enthusiasts from around the world on this forum
    • Participate in and browse from over 516,210+ posts.
    • Communicate privately with other divers from around the world.
    • Post your own photos or view from 7,441+ user submitted images.
    • All this and much more...

    You can gain access to all this absolutely free when you register for an account, so sign up today!

Omer Alien Mask

Thread Status: Hello , There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.

Wolfen

New Member
Mar 26, 2006
5
1
0
Hey guys I have a problem with my new omer alien mask! The mask is always fogging :confused: I have tried toothpast and spit and antifog stuff,and with the antifog stuff I had one side that was clear and the other had fog :confused:. In all my masks I have never had a mask that fogged like this one. Any advice would really help thanks!
 
I find it helps to cool the face down foar a few seconds in the water you are going to dive in first. The heat from your face is partly responsible for the fogging of the mask. Some days nothing works though :confused:
 
I have this mask and did have to do the toothpaste thing 3 times to get it done. If you have not polished each lens for at least 4 min. then you should try again. As for anti-fog I have had best luck with 500 PSI and Sea Gold. Use it before every dive. Do not give up on the mask it will clear up and is a great mask imho. Good luck.
 
I know that some people prefer using regular lighter and "flaming?" the glass on the outside. According to them it works much better than using toothpaste. Though I've never tried it myself :)
 
some advices :t

first of all
clean 2-3 times the mask from the inside & outside with
kitchen liquid soap as palmolive with scotch
clean even the silicone well

wet you face in the sea water 2-3 time to cool it
spit inside the mask & scrape with your fingers no glove!

it sould work after 1-2 dives you wont see any fog again

if thats wont help
do 1 scratch on the inside of each glass near to the silicone
( the scatch take the fog inside )
i hope it will help you my friend
 
Once I had to apply the tooth paste several time on a cressi mask I had, I also find helpfull to leave a little paste inside the mask
 
Try some potato juice (raw) if you still have problems, maybe the mask is not fitting you ok, and you are leting scape some air from the nose ...
 
Another basic idea to minimise mask fogging is to make sure it's the last piece of equipment you put on pre diving. With shore diving especially, if you put on your mask then stuggle putting on your fins / gloves etc, you will often mist up the lenses.
 
DeeperBlue.com - The Worlds Largest Community Dedicated To Freediving, Scuba Diving and Spearfishing

ABOUT US

ISSN 1469-865X | Copyright © 1996 - 2024 deeperblue.net limited.

DeeperBlue.com is the World's Largest Community dedicated to Freediving, Scuba Diving, Ocean Advocacy and Diving Travel.

We've been dedicated to bringing you the freshest news, features and discussions from around the underwater world since 1996.

ADVERT