Pneumatic speargun compressor

[04xrider]

Hey all, new guy here and wanted to share my speargun compressor I made. It can take the speargun from 0-300 psi in about 30 seconds. The compressor came from an old wine cooler that I converted to an incubator and most of the hardware came from lowes, the diamond plate and pressure gauge were from ebay.

 

[popgun pete]

Hey all, new guy here and wanted to share my speargun compressor I made. It can take the speargun from 0-300 psi in about 30 seconds. The compressor came from an old wine cooler that I converted to an incubator and most of the hardware came from lowes, the diamond plate and pressure gauge were from ebay.

If you remove it before some people see it then you will not get any replies. Not everyone is in the same time zone!

 

[Diving Gecko]

Hey all, new guy here and wanted to share my speargun compressor I made. It can take the speargun from 0-300 psi in about 30 seconds. The compressor came from an old wine cooler that I converted to an incubator and most of the hardware came from lowes, the diamond plate and pressure gauge were from ebay.

Sounds intriguing, any link?

 

[jezpatrol]

Sorry to dredge an old post but im trying to make something like this, any pics or links?

Jez

 

[Diving Gecko]

It's pretty easy, actually - the main hurdle is the pump thread to go into your pump inlet valve. But that part got easier since Salvimar started selling adapters for 15E. I think they are female straight 1/4 pipe thread but find my thread on the Scuba Tank Pump Adapter and the info should be in there.
If you want to go safe, then do consider getting one of those over pressure pop valves.

Here are some links from the archives:
http://www.pescasubapnea.com/pescasub/fai-da-te/olepneumatico-compressore-fai-da-te/
http://www.pescasubapnea.forumfree.it/?t=39762834&st=2865


good luck!