-
Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:
- Join over 44,280+ fellow diving enthusiasts from around the world on this forum
- Participate in and browse from over 516,210+ posts.
- Communicate privately with other divers from around the world.
- Post your own photos or view from 7,441+ user submitted images.
- All this and much more...
You can gain access to all this absolutely free when you register for an account, so sign up today!
REPAIR MARES
- Thread starterrobert terwilliger
- Start date
Thread Status: Hello
, There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.
It can take a long time to get an up-to-date response or contact with relevant users.
There could be a number of reasons why,
your pump has gone bad
the rear fill valve has gone bad
gun is full and wont accept any more air with that pump (found they seem to only be able to pump up to about 270) at least thats the max i could get from mine
spearfishingworld.com sells them, thats a very simple and easy repair. Release the pressure in the gun, unscrew the old one and remove, then install the new one. you can also send your gun into SFW and they do repairs as well.
your pump has gone bad
the rear fill valve has gone bad
gun is full and wont accept any more air with that pump (found they seem to only be able to pump up to about 270) at least thats the max i could get from mine
spearfishingworld.com sells them, thats a very simple and easy repair. Release the pressure in the gun, unscrew the old one and remove, then install the new one. you can also send your gun into SFW and they do repairs as well.
