• Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:

    • Join over 44,280+ fellow diving enthusiasts from around the world on this forum
    • Participate in and browse from over 516,210+ posts.
    • Communicate privately with other divers from around the world.
    • Post your own photos or view from 7,441+ user submitted images.
    • All this and much more...

    You can gain access to all this absolutely free when you register for an account, so sign up today!

Riffe Euro Series Shafts

Thread Status: Hello , There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.
R

RMI Spearo

New Member
Feb 22, 2008
6
0
0
Hey guys,

I'm an Australian living in the Marshall Islands working here and am in a big dilemma now after bending my last shaft for my Riffe Euro Series 110 Gun. A bout with a dogtooth left it slightly bent and pretty much unusable.

Apparently my gun is one of the originals and only takes a 17/64" (6.75mm) shaft? Do other diameters still fit this gun? I am after a threaded shaft now to use a slip tip but am struggling to get good answers on if it will fit in my gun. I will have to order on line somewhere.
Also what other brands of shafts are compatible with the Riffe Euro series guns? Rob Allen etc???

Thanks guys.
 
I'd drop Riffe a line and ask them - to be sure. I have heard the riffe euro will shoot both standard euro shafts and the square notched riffe shafts - but do check with them.
 
the riffe website says the track is made for up to 7.1 mm regular euro shafts
 

Did you solve it? Cause I have Riffe Euro 120 and tried RA shafts but they won't go in. I have access to American spears hope that will fit my gun.
Otherwise we are pretty much screwed as Riffe shafts are expensive and tend to bend easily.
 
Thanks mate.
I sorted it to the best i could. Ended up getting a threaded riffe shaft 7.1mm with a slip tip. So shouldnt have as big a problem of bent spears now hopefully. 7.1mm shaft was the biggest one that could fit into my Euro 1.1m.
Cheers.
 
Grass,

I picked up some Riffe Euro 9/32 with the the 6mm threads for my 100cm and 120 cm RA and my 100cm Rabitech and they locked and released from the trigger mech fine. But I havent tried it in reverse with my Andre 145cm which has a RIffe trigger mech. It wont work? I guess it doesnt matter but thats weird??

good luck

Joel
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…