• Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:

    • Join over 44,280+ fellow diving enthusiasts from around the world on this forum
    • Participate in and browse from over 516,210+ posts.
    • Communicate privately with other divers from around the world.
    • Post your own photos or view from 7,441+ user submitted images.
    • All this and much more...

    You can gain access to all this absolutely free when you register for an account, so sign up today!

Rigging real to spear shaft

Thread Status: Hello , There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.
N

Nettuno

New Member
Sep 27, 2011
3
0
0
Hi guys,

I've taken up spearfishing recently so I would greatly appreciate your feedback. I own a Beuchat Marlin Carbone and I'd like to rig a new reel.

What are your opinions on the following:
1) Should I remove the shock absorber bungee when connecting the dyneema line to the spearshaft?
2) Do you eliminate completely the nylon filiment (which comes standard with the speargun) which connects the shaft to the speargun or should I simply retain the standard rigging and attach the dyneema line to the end of the shaft?

Thanks in advance :wave
 
The most common alternative is to remove the bungie, keep the mono shooting line (it's faster), and connect the end of the shooting line to the reel line. A simple knot with a loop to undo works, but most seem to use a pigtail or clip.
 
Thanks hteas for your reply. Will do as you suggested! I had second thoughts on retaining the bungie as it would probably slow down the shaft due to its impact absorption prior to the reeling out of the reel line.

Cheers
 
hello

i dont now if you understanding a french language but you follow this is video.

arbalète préparation - YouTube

and for a shock absober this is

[ame=http://youtu.be/tAWmVuosiSQ]AMORTISSEUR SHOCK ABSORBER - YouTube[/ame]

Jean-Luc
 
Thanks for the video Jean-Luc, it's very informative. I really appreciate your help guys.

I'm gonna try rigging my speargun with the shock-absorber and we'll see how it goes from there.
 
We dive almost exclusively with reels here in Hawaii. You still want to have one to two full wraps of shooting (monofilament or dyneema) line before the reel line. Your reel line generally doesn't start until beyond the range of the gun and there for a bungee will not slow down your shaft. The reason I keep the bungee is that if I know I am going after small game I crank down the reel so that a small fish cant pull out a bunch of line. Its a Pain in the a$$ when a little reef fish is able to pull of 50ft of line and then you spend the next 10 minutes winding it up while all the other little fishies are laughing at you.
 
hi

it's just a way to assemble. you must adapt your installation to your spearfishing grounds.
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…