• Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:

    • Join over 44,280+ fellow diving enthusiasts from around the world on this forum
    • Participate in and browse from over 516,210+ posts.
    • Communicate privately with other divers from around the world.
    • Post your own photos or view from 7,441+ user submitted images.
    • All this and much more...

    You can gain access to all this absolutely free when you register for an account, so sign up today!

Spear modification

Thread Status: Hello , There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.

gladiator

New Member
Nov 5, 2006
64
3
0
I would like to add a JBL slide ring to my imersion concept pro spear so that the shaft can go line-free into my trigger mechanism. I need a creative idea to add a stopper to the lower part of the spear to prevent the slide ring from coming out of the shaft. (I hope I am explaining it correctly)
You might suggest to buy a new spear that has a has screw on tip, but unfortunately the ones available where I am are very heavy and of a terrible quality.

Thanks
 
What about having a spring steel spear milled so that it tapers slightly toward the end of the spear and so catching your slide ring on the thicker part. I think using a phisical stopper on the spear defeats the object of your excersise not wanting anything interfering with the slide action of the spear from the muzzle of the gun, which is why I take it you dont want the line there. I cant really think of another way other than that or having a stopper bonded to the spear itself, if you follow this route Id say it should only be on the top half of the spear as to not interfere with the sliding action in the rail...
Just my two sents worth dont know if it can actually work
 
Just put a pin through the back hole of the spear so that it sticks out enough to stop the slide ring.
why on earth you want to fit a slide ring, with all the noise, drag and hassle to a perfectly good setup I cant imagine though
cheers
dave
www.spearo.co.uk
 
Hey Dave,
The reason is often when loading the line gets caught with the wishbone, after sever loadings and pinching of the line it will break very easy when pulled by a good size fish. Besides, loading time will be much quicker (in my opinion) and no lines will be tangled in the muzzle.
 
Hiya

Much simpler solution would be to simply drill a hole in FRONT of your spear's notches and attach your shooting line to it. Alternatively, make the loop at the end of the spear smaller, so that it doesn't interfere with your loading.

Regards
miles
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…