spear shaft question

[sickbugs]

anyone out there makes 6.5 -7mm euro notched, full sharkfin shafts?

 

[dave]

Seatec
Dessault
Riffe
and probably a few more

cheers
dave
Spearguns by Spearo uk ltd finest supplier of speargun, monofins, speargun and freediving equipment

 

[sickbugs]

i was under the impression those were the shorter finned (semi notch/semi fin) shafts, what im lookin for is somethin with a full length fin to use in an enclosed track eurogun

 

[Pastor]

The only one I know of that even comes close is the abellansub shafts which aren't strictly sharkfins either but a raised post welded onto the back end of a shaft

 

[dave]

The Seatec Australia shafts are 6.5 or 7mm with a full sharkfin that protrudes about 4mm above the shaft. I dont see why they shouldn't work with an enclosed track, but I haven't tried them in one
cheers
dave
Spearguns by Spearo uk ltd finest supplier of speargun, monofins, speargun and freediving equipment

 

[jordan hamilton]

If you are looking for good quality special diameter spear shaft with low profile "shark fins" contact Mori ( Morifish Enterprises) morifish@aol.com .
He produces many different spear shafts by customers order.
Jordan
Hamilton Spear Guns - Custom Built Wood Spearguns

 

[sickbugs]

dude, your guns rock !!!

i'll check with mori, if i do actually decide to build this gun

 

[Ron S]

Hammerheadmuzzles.com sells a pinned shaft for euro guns in either 6.75mm or 9/32" diameters. They can also be had with a "doghous" on the top for the shooting line. Should work in an enclosed track gun. Take a look at their shafts on their website.