• Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:

    • Join over 44,280+ fellow diving enthusiasts from around the world on this forum
    • Participate in and browse from over 516,210+ posts.
    • Communicate privately with other divers from around the world.
    • Post your own photos or view from 7,441+ user submitted images.
    • All this and much more...

    You can gain access to all this absolutely free when you register for an account, so sign up today!

Teak speargun stock!

Thread Status: Hello , There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.

icarus pacific

Human-in-training
Nov 7, 2001
2,880
212
0
64
Custom and handmade, teak laminated stock for your next speargun! :cool:

Dried, aged, and clear TEAK is cut, the grain is reversed in a book pattern and then laminated with genuine West systems epoxy. That is then aged for 3 weeks to relieve stresses and is precision cut and milled for your specific needs!

4,5, and 8 layers available depending on the length you want, 24" to 120" of dakine stuff! And here's where it gets sweet... if you want, you can get the material pre milled, shaped and machined for your choice of trigger and hardware! It gets no easier to build the bazooka of your dreams! :martial

And since the Sultan is building them, you know it's smooth!:king Wood is good!

Six foot stock, laminated and aged starts at $225 US. Shipping and hardware extra.

Be the hunter you always wanted to be or build yourself some hella cool wall art! Hit the PM button and let me know what ya need!

Check out the stuff below.


sven
DB comp guru
 
Last edited:
Lest you think that was a fluke, here's what the basics are and an example of what you can make your sweety for Christmas, and then borrow! ;)


sven
 
Last edited:
Is this offer still available? I and a friend are about to build our own. My JBL woody magnum just does not have the power or range I can use, even with shorter bands.

I also do not have as much time as I would like, and do not want to wait 3 weeks for the lamination/cure process.

Thanx.
 
clay, that post was in 2002, not sure if its valid, but i would think not :)
cheers
 
DeeperBlue.com - The Worlds Largest Community Dedicated To Freediving, Scuba Diving and Spearfishing

ABOUT US

ISSN 1469-865X | Copyright © 1996 - 2024 deeperblue.net limited.

DeeperBlue.com is the World's Largest Community dedicated to Freediving, Scuba Diving, Ocean Advocacy and Diving Travel.

We've been dedicated to bringing you the freshest news, features and discussions from around the underwater world since 1996.

ADVERT