Can you guys give me some names of companies that make trigger assemblies?
Looking for one but just want to see whats out there first.
Looking for one but just want to see whats out there first.
-
Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:
- Join over 47,943+ fellow diving enthusiasts from around the world on this forum
- Participate in and browse from over 531,990+ posts.
- Communicate privately with other divers from around the world.
- Post your own photos or view from 7,455+ user submitted images.
- All this and much more...
You can gain access to all this absolutely free when you register for an account, so sign up today!
trigger
- Thread starter pannystyle
- Start date
Thread Status: Hello
, There was no answer in this thread for more than 90 days.
It can take a long time to get an up-to-date response or contact with relevant users.
It can take a long time to get an up-to-date response or contact with relevant users.
Don't know much about the American ones though I know of a few:
US: Gilbert Gacula (spear diver), Riffe, Steve Alexander.
EURO: Totemsub, Abellan,
Try and search for teak or handmade guns and see which triggers they use.
There are a lot more european triggers than I menitioned.
US: Gilbert Gacula (spear diver), Riffe, Steve Alexander.
EURO: Totemsub, Abellan,
Try and search for teak or handmade guns and see which triggers they use.
There are a lot more european triggers than I menitioned.
Aimrite
Riffe
Alexander
Gat-ku (Alexander copy)
..................and now "AQUASUB"!!!
Manufactured from a single billet of 316 stainless steel and with a 17-4ph hardened seer. We did such a good job making the trigger pull light and smooth that it is now being slightly modified to require a little more effort. The current prototype required only 1.5 pounds of pull under a 600 pound load.
(these are in pre-production and should be available early august)
Riffe
Alexander
Gat-ku (Alexander copy)
..................and now "AQUASUB"!!!
Manufactured from a single billet of 316 stainless steel and with a 17-4ph hardened seer. We did such a good job making the trigger pull light and smooth that it is now being slightly modified to require a little more effort. The current prototype required only 1.5 pounds of pull under a 600 pound load.
(these are in pre-production and should be available early august)
Attachments
Last edited:
Aimrite
Riffe
Alexander
Gat-ku (Alexander copy)
..................and now "AQUASUB"!!!
Manufactured from a single billet of 316 stainless steel and with a 17-4ph hardened seer. We did such a good job making the trigger pull light and smooth that it is now being slightly modified to require a little more effort. The current prototype required only 1.5 pounds of pull under a 600 pound load.
(these are in pre-production and should be available early august)
how much will these trigger cost?
Sorry for the lack of communication...i was only inquiring about the aquasub triggger mech coming out ????
thanks anyways though
thanks anyways though
It's undetermined at this time since I do not have the final production costs, however I can state that I am shooting for a retail cost under $75 which should make it difficult to not choose the AQUASUB for custom gun builds.