• Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:

    • Join over 44,280+ fellow diving enthusiasts from around the world on this forum
    • Participate in and browse from over 516,210+ posts.
    • Communicate privately with other divers from around the world.
    • Post your own photos or view from 7,441+ user submitted images.
    • All this and much more...

    You can gain access to all this absolutely free when you register for an account, so sign up today!

Weight belts

Thread Status: Hello , There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.

covert

Aquatic Assassin
Jan 8, 2007
644
53
0
Hi all I assume there should be a thread around here with the info I am requesting but I cant seem to find it while searching.

I thought it might be a good idea to have a thread somewhere with some general guidelines as to weights and buoyancy. Example
Have a table or breakdown which contains the following: If the diver weighs 85KG has a 5mm wetsuit, will dive in conditions 12m to 20m (ocean) he needs to achieve neutral buoyancy at X m and needs to use approx X amount of KG’s to achieve this.

If that makes sense J Then have sort of a sliding scale with different diver mass and different diving depths. ????

Or am I just silly.
 
Sadly, this will be hard to do. One could make a relative table on the differences, but not an absolute table like You describe. The problem is, that buoyancy depends on many things, from suit over body fat to what You had for dinner yesterday (Yes, beans do add positive buoyancy :D ).

But a table for weight differences, yes. So You could look up the answer for a question like this:
"I am buoyant at -10m with x kg of lead, how much do I need to add to be buoyant at -4m?"
That one should even be fairly simple...
 
Yeah i was basically talking about estimated guidelines, I know there are many variables but the margin of error cant be too great.
 
lets take mysef for example, I weight 87KG's am going to wear a 5mm open cell wetsuit, to dive in conditions no more than 15m in cold 8-14c salt water.

Now i know that in itself has many variables, ie type of suit, body fat etc etc. but there should be a relative guidline for those specs? If not oh well trial and error would be the only way to go then :)
 
Hmm.. maybe a range could be given, but that will be a big one ... For You this could be around 4-10 kg ? dunno.. :confused:

A possibility might be finding out Your - let's call it default load - (e.g. kg Pb needed for neutral buoyancy in saltwater at -10) in well-defined settings and then the table could provide a corrective factor to be applied to this default load.

doable?
 
I was in the same position as you... wait there i will try and dig up my responses.
 
I've seen a lady dive with a 3mm suit and 8kg of Lead... I had the '!?!?!?' written all over my face
 
:D sorry for jumping and over-reacting but... how large was the lady :D ????
 
You don't want to know. :D
Extremely nice person, but lots of trouble when travelling by plane.
 
:D
Extremely nice person...

Well thats what matters :)

Perhaps we should get back to the matter in hand now. I am sure there is a general rule when it comes to applying weights, but i really cant remeber what it was... maybe it was spaghetti that said it... lets wait for him :D

Huw
 
Add 2 to the thickness in mm of wetsuit to give approx. weight of belt; i.e. 5mm suit + 2 = 7Kg of weight. I have followed this principle and it has worked fine for me. cheers
 
  • Like
Reactions: Huw
There we go!! Thats the rule i was thinking of!! It did work for me. Of course other factors do enter into it, however it is a good place to start.

Huw
 
only 22lbs of lead? I am diving with a 7mm wetsuit in 50 degree water, and i need 26lbs of lead to be neutral at the surface. I add a couple of abalone to my wetsuit and i sink a little. I have about 12 to 15% body fat.
 
Like we said... its a rough rule of thumb, and somewhere to start. Its not an exact formula. Its very usefull if like me you had no idea where to begin, it saved me from starting at 1kg and working all the way up... seriously i was completely clueless. No one wants to be jumping into water strapped up with a lead belt for their first time with no clue on what they are doing. It wont work for everyone.

Huw
 
Ocean... i used to watch your thread on your small pnumatics.... did you make a choice yet? I posted on the original thread so as not to bore these guys, but im just curious :D.

Huw
 
Huw yes i purchased a cressi 55cm speargun. I am making a holster for it right now. Its going to work great. I will use my polespear on fish under 10lbs and whip out that speargun when i see a big fish.
 
  • Like
Reactions: Huw
:D good good, be sure to let us know the results :).
 
DeeperBlue.com - The Worlds Largest Community Dedicated To Freediving, Scuba Diving and Spearfishing

ABOUT US

ISSN 1469-865X | Copyright © 1996 - 2025 deeperblue.net limited.

DeeperBlue.com is the World's Largest Community dedicated to Freediving, Scuba Diving, Ocean Advocacy and Diving Travel.

We've been dedicated to bringing you the freshest news, features and discussions from around the underwater world since 1996.

ADVERT