-
Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:
- Join over 44,280+ fellow diving enthusiasts from around the world on this forum
- Participate in and browse from over 516,210+ posts.
- Communicate privately with other divers from around the world.
- Post your own photos or view from 7,441+ user submitted images.
- All this and much more...
You can gain access to all this absolutely free when you register for an account, so sign up today!
Where to find a barrel for Imersion Consept handle
- Thread starterkhel
- Start date
Thread Status: Hello
, There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.
It can take a long time to get an up-to-date response or contact with relevant users.
Size - 25"-30" (500-600mm) or so. As for material, that I'm not really sure. At first I was thinking about wood, but considering that inner diameter is rather small, I don't think it'll be strong enough.
Looks like imersion is using aluminum or carbon tubes that goes on top of it, but I doubt that I'll be able to make it at home
So, atm, I don't have any good ideas.
Looks like imersion is using aluminum or carbon tubes that goes on top of it, but I doubt that I'll be able to make it at home
So, atm, I don't have any good ideas.
You could do what a few guys here is Oz use for their comp guns.
With your handle get a bit of aluminium barrel or pipe that fits over the handle part. Attach it to the handle so you have a gun without a muzzle. Make it about 15cm long (6") and then put your stock in a lathe and turn it to fit the inside of the aluminium barrel. You can also do this so you can use a euro muzzle.
I know one such fellow who has a rabitech apex handle with a bit of 'EDGE' barrel and then a KES laminated barrel and then a bit of 'EDGE' barrel and then a rob allen muzzle. Looks the goods and works great!
With your handle get a bit of aluminium barrel or pipe that fits over the handle part. Attach it to the handle so you have a gun without a muzzle. Make it about 15cm long (6") and then put your stock in a lathe and turn it to fit the inside of the aluminium barrel. You can also do this so you can use a euro muzzle.
I know one such fellow who has a rabitech apex handle with a bit of 'EDGE' barrel and then a KES laminated barrel and then a bit of 'EDGE' barrel and then a rob allen muzzle. Looks the goods and works great!
I am not the original poster, but I also have this handle. I was thinking of using RA barrel with it. The handle diameter is 25.9-26.2 mm (it's not a perfect circle). Does anybody know if RA barell would fit over the handle? Any alternatives?
I know florida freedivers sell RA parts, where would one buy a barrel separately?
I know florida freedivers sell RA parts, where would one buy a barrel separately?