• Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:

    • Join over 44,280+ fellow diving enthusiasts from around the world on this forum
    • Participate in and browse from over 516,210+ posts.
    • Communicate privately with other divers from around the world.
    • Post your own photos or view from 7,441+ user submitted images.
    • All this and much more...

    You can gain access to all this absolutely free when you register for an account, so sign up today!


New Member
Jun 22, 2021
It's time for a real upgrade! The future is digital. Replace your old pressure gauge with a digital console, which shows so much more than just the 'bar' left! Get it in 5 stylish colours and have a back-up computer with you.

1278__rm_digi2_rosso_fronte_z (1).jpg

We entrust one of the most important data related to our safety, if not the most important, that of the air pressure of the bottle, to an extremely simple and not very precise instrument, the analog manometer, a copper spiral through which a hole detects the pressure and offers the reading in a sphere moving the needle.

Technical Features

  1. - Automatic activation with connection to the tank
  2. - High contrast display
  3. - Depth indicator 0-120 meters
  4. - Tank pressure indicator 0-300 bar
  5. - Water temperature indicator -10/+50 °C
  6. - Residual gas autonomy in minutes indicator
  7. - Gas reserve below 50 bar indicator
  8. - Maximum depth of the last dive
  9. - Autonomy up to 1000 hours in immersion
  10. - Low battery indicator
  11. - Self-diagnosis for battery change (patented)
  12. - Dedicated smartbox that allows you to interact (patented)
  13. - User-replaceable silicone protective shell
  14. - Dimensions: 9.9 x 5.2 x 2.8 cm
  15. - Weight: 122 gr

The Digi 2 comes with a hose to easily install in your first stage!



  • Minimized size: box of 60 x 50 mm
  • Impact-resistant ABS housing with thermoplastic rubber cover with integrated fixing ring
  • Rectangular screen 45 x 27 mm luminescent with Bumpon protector against impacts and scratches.
  • Large digits (10 x 5 mm main data) with segments separated by distribution lines
  • Post-production battery saving system by means of magnet.
  • The intelligent box (patented) can be used to keep the DIGI 2 in latent energy saving mode and perform tasks such as changing units of measurement.
  • Replacement of the battery by the user without the need for tools.
  • After changing the battery, DIGI 2 carries out a pressurisation self-test (patented) to ensure that it has been carried out correctly. Battery cover specifically designed to prevent incidents with two fastening clips and to provide easily replaceable parts (O-ring).
  • Completely modular construction that allows, when the time comes, its repair
  • Automatic switch-on when pressure is detected

Data supplied:

  • Tank pressure with 3 digits (accuracy of 0.1 bar) between 0 and 340 bar
  • Current depth with 1 decimal place
  • Maximum depth of the current dive
  • Maximum depth of the previous dive (when cylinder pressure is detected)
  • Dive time
  • Temperature
  • Datum: Remaining time to reach reserve pressure (50 bar). Updated every 1 second according to the breathing rhythm of the moment.
  • Great autonomy: up to 700 dives in a year.
DeeperBlue.com - The Worlds Largest Community Dedicated To Freediving, Scuba Diving and Spearfishing


ISSN 1469-865X | Copyright © 1996 - 2021 deeperblue.net limited.

DeeperBlue.com is the World's Largest Community dedicated to Freediving, Scuba Diving, Spearfishing and Diving Travel.

We've been dedicated to bringing you the freshest news, features and discussions from around the underwater world since 1996.