This is my first time building my own gun. I laminated two peices of oak on both sides of a piece of walnut. The stock is 48". I also made some wings out of bloodwood and mahagony. I purchased a riffe orignal kit. I was wonderning if it is better to install all the "guts" before coating the stock with Epoxy, or vice versa. Also, the kit did not come with any instructions so for anyone willing to give me some tips that would be greatly appreciated.
-
Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:
- Join over 47,943+ fellow diving enthusiasts from around the world on this forum
- Participate in and browse from over 531,990+ posts.
- Communicate privately with other divers from around the world.
- Post your own photos or view from 7,455+ user submitted images.
- All this and much more...
You can gain access to all this absolutely free when you register for an account, so sign up today!
1st time makeing a speargun Help!!!
- Thread starter Hapa4Lyph89
- Start date
Thread Status: Hello
, There was no answer in this thread for more than 90 days.
It can take a long time to get an up-to-date response or contact with relevant users.
It can take a long time to get an up-to-date response or contact with relevant users.