• Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:

    • Join over 44,280+ fellow diving enthusiasts from around the world on this forum
    • Participate in and browse from over 516,210+ posts.
    • Communicate privately with other divers from around the world.
    • Post your own photos or view from 7,441+ user submitted images.
    • All this and much more...

    You can gain access to all this absolutely free when you register for an account, so sign up today!

75cm or 90cm speargun for reef fishing?

Thread Status: Hello , There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.
What thick and length shaft did you use for these 2? I am planning similar use of 1 gun 90 or 100cm. Dual 14 or 16 rubber.
Hiya!,

6.5mm for both shafts, one is a 140 the other one is a 118( I cut an old slightly bent 140)
 
For dual 14mm bands 6.75mm should work ok too, that's what my Apnea ST60 came with. RA spec. 7.5mm spears for their 2x16mm Tuna model - they tend go a little thicker than most. I would guess that they spec. 7mm for 2x14mm ( as they do for their 1x20mm offering - by contrast, my Omer's came with 6.3mm spears for 1x18mm screw-on bands, superlight).
 
DeeperBlue.com - The Worlds Largest Community Dedicated To Freediving, Scuba Diving and Spearfishing

ABOUT US

ISSN 1469-865X | Copyright © 1996 - 2024 deeperblue.net limited.

DeeperBlue.com is the World's Largest Community dedicated to Freediving, Scuba Diving, Ocean Advocacy and Diving Travel.

We've been dedicated to bringing you the freshest news, features and discussions from around the underwater world since 1996.

ADVERT