• Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:

    • Join over 47,943+ fellow diving enthusiasts from around the world on this forum
    • Participate in and browse from over 531,990+ posts.
    • Communicate privately with other divers from around the world.
    • Post your own photos or view from 7,455+ user submitted images.
    • All this and much more...

    You can gain access to all this absolutely free when you register for an account, so sign up today!

A Quick Freediving Gear Guide

Thread Status: Hello , There was no answer in this thread for more than 90 days.
It can take a long time to get an up-to-date response or contact with relevant users.
I found the NomadTrip gear guide useful, thanks.

As I wade through the selection process, I end up with some observations and some questions:

Snorkel: Perhaps the simplest choice to make. I do like the bright top for being seen (especially by fast-moving boats!), and a dry-top. I prefer the rigid to the flex so that the position of the snorkel top is more predictable/controllable. (I'm looking at the Cressi Acitiva Purge 2.)

Weight belt: Also pretty simple, though I have one open question: So many belts have a standard belt buckle (with prong), which surprises me. The "clamp" type seems like it would be MUCH quicker to undo in a life-or-death "drop your weights" situation; am I missing something here? Barring any illuminating new info, I believe I'll go with the clamp-style. (I'm looking at the Beauchat rubber belt with stainless clamp buckle.)

Mask: This seems like the piece of gear most important to try on before buying (or buy with a free return policy, at least). Plastic or glass lenses is a choice that rules out the ever-present Aqualung Sphera or not, then it seems like a horse race. I like the Aqualung Micromask (except for the price), and the Omer Zero and Cressi Minima both look like solid choices as well, but I'm looking forward to visiting the James and Joseph shop during my upcoming training class.

Fins: Ah, getting complicated: Modular or not? Which fin material? Balance of cost and "best" choice? I love to have great gear in any endeavor, but this is a place where there's a 200% to 500% increase in cost involved. I like the idea of modular footpocket+blade combos, but I don't see any mention of cross-brand compatibility. The modular setups that look feasible for me include Cressi, Beauchat Mundial, and Omer, maybe there are more. The thing is, I don't see much in the way of upgrade options for the blades, so why not go with a non-modular? I'm considering the Cressi Gara 3000 LD, Cressi Gara Modular, the Beauchat Elite or Competition, and the Omer Stingray. (Currently leaning towards the Omer Stingray.)

Side note: Booties. Some vendors and forum posters indicate that the same fins can be worn with and without booties, while some say that needs two different foot pockets. If the latter is true, I'm tempted to get fins which fit a modest-thickness bootie, the idea being I'd rather have a bootie on which I don't need than be lacking a bootie and having cold feet. Thoughts and experience welcome.

Wetsuit: Again, pretty complicated, and unless one goes with carbon fins and/or a dive computer, likely the most expensive piece of gear. Choices include vendor, thickness, choice of which neoprene, outside fabric or smoothskin, inside lining or not, and form (two-piece, farmer john or plain pants, one-piece,( Thanks to BatRay, I didn't rule out Elios ("custom-made" sounded expensive!), and in chatting with them via email, combined with input from these forums, I'm looking at a 5mm suit from Elios, open-cell inside, and some kind of exterior fabric, still discussing with Elios. I'll likely skip the custom suit, as I'm typically well-matched to an off-the-shelf medium. (If that doesn't fit, I can swap for a custom suit with no risk except shipping.)

Dive computer: Clearly not required, clearly desirable (both IMHO). Given the expense, I'm going to skip it for my 'beginner phase.' After that, it looks like Suunto and Aeris each have their following, and that anyone else in the race is an also-ran.

I have to say, research is fun... and it's free. :-) I hope to benefit from the effort by not feeling a need to re-equip for quite some time. Thanks to all on this forum for contributing your time and expertise.

Bob
 
Side note: Booties. Some vendors and forum posters indicate that the same fins can be worn with and without booties, while some say that needs two different foot pockets. If the latter is true, I'm tempted to get fins which fit a modest-thickness bootie, the idea being I'd rather have a bootie on which I don't need than be lacking a bootie and having cold feet. Thoughts and experience welcome.

I'm going to take the easy one. In California you need booties, and the foot pockets have to be big enough to accept them. You definitely can't wear the same foot pocket that you would wear without them. Almost everyone who dives with me wears the 4 mm high top Argos.

http://www.neptonicsystems.com/argos.php

BTW, Neptonics is one of the best sources for all your needs.
 
Thanks, Bill. So, do hightop booties end up under the wetsuit, and would low-top booties leave a gap? Also, would 3mm suffice? I'm thinking that if I end up wearing booties in Maui, thicker might be too thick. No?

The Neptonics website is pretty funky in design, I've just started to navigate... thanks. :-)
 
You could wear them over the wetsuit, but most people wear them under. Or at least I do- I don't pay that much attention to how others wear them.

I suppose 3 mm might suffice, but your feet might be too cold in Norcal. You aren't going to be able to make everything work in both places, and I doubt that hot feet can be a problem.
 
Very simple and informative guide for people getting started out. One piece of info you may want to consider if giving advice on fins, While carbon fiber fins are more expensive they solved the main problem with fiberglass which is delamination.
How did they fix the delamination problem, this is not meant as a smart ass response, I'm thinking that maybe the more expensive carbon fibre fins that maybe they've gone to the expense of using the best resins, as cost isn't quite as big a consideration or maybe paid better attention to manufacturing techniques in general also due to not being pushed to produce as cheap a fin as possible , please help me if i'm wrong but I don't know why you think carbon fibre delaminates less then fiberglass if all manufacturing is equal apart from the fibres used. Just realised that your post is fairly old.
 
Carbon fins are fine but a bit sensitive...On a rocky coast and the sea a bit rough I sometimes prefer my old Cressi 3000 Gara. They are pretty efficient, come moderate price - and are undestroyable :-)
 
DeeperBlue.com - The Worlds Largest Community Dedicated To Freediving, Scuba Diving and Spearfishing

ABOUT US

ISSN 1469-865X | Copyright © 1996 - 2026 DeeperBlue Global Media Limited.

DeeperBlue.com is an independent digital media platform dedicated to Scuba Diving, Freediving, Ocean Advocacy, and Dive Travel.

Since 1996, we’ve been informing, educating, and inspiring the global diving community through trusted news, features, and shared community experience.

ADVERT