• Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:

    • Join over 44,280+ fellow diving enthusiasts from around the world on this forum
    • Participate in and browse from over 516,210+ posts.
    • Communicate privately with other divers from around the world.
    • Post your own photos or view from 7,441+ user submitted images.
    • All this and much more...

    You can gain access to all this absolutely free when you register for an account, so sign up today!

Dive Line Marking

Thread Status: Hello , There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.

7BDiver

Active Member
Sep 5, 2019
215
74
43
36
What is a good way to mark a dive line by length or segmented lengths in a way that would not interfere with a lanyard or require knots? This would save a bit of hassle pulling 6' arm lengths off the reel and adding to mark a depth. Is there a way this is generally done?
 
I have a white and yellow lines and I used a Indelible marker and put markers every 10 feet for me. Ten feet one line twenty feet two lines and so on and so on up to 50ft that way I know how deep I’m at for spearfishing with a float.
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…