• Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:

    • Join over 47,943+ fellow diving enthusiasts from around the world on this forum
    • Participate in and browse from over 531,990+ posts.
    • Communicate privately with other divers from around the world.
    • Post your own photos or view from 7,455+ user submitted images.
    • All this and much more...

    You can gain access to all this absolutely free when you register for an account, so sign up today!

Glue/adhesive

Thread Status: Hello , There was no answer in this thread for more than 90 days.
It can take a long time to get an up-to-date response or contact with relevant users.
I would think normal wetsuit repair glue. I buy the cheapest per ml available as price and volume varies significantly, I think my current tubes are by dive company Spetton and I was pleasantly surprised how well it works. Strong, black, flexible and elastic. I think Picasso sell something similar, possibly called something like Black Witch.

Note: you can get glue that is made of neoprene. We never did work out if this is the same thing.
 
  • Like
Reactions: BazM
Hi guys , what’s the best glue for sticking a chest pad onto a wetsuit ?
I second the recommendation for wetsuit repair glue. A common brand here is AquaSeal. I believe it is a urethane glue and should stick to the woven nylon fabric covering that most wetsuits have. It is a tenacious glue. It is claimed as flexible, but in my experience it can be hard if used to fill voids or in excess. A thin layer under a pad shouldn't be noticeable. A quality rubber cement, such as Bostik or the 2-part glues for hypalon boat repair, would also work well, though I don't know how they would handle the nylon skin. You might have to remove that from the glued areas.
 
Indeed just recently used wetsuit glue for the exact same purpose and it works fine.
b651e734c6c7433240dd9fbef4eea512.jpg
 
  • Like
Reactions: BazM
Aquaseal is too hard. Use wetsuit repair glue, which basically is chloroprene contact cement with black dye.

My mistake. Wetsuit repair glue is what I used.

You mention that it is dyed black. I wonder if you could make a good permanent wetsuit dye by including this repair glue into a mixture of the appropriate coloring agent and a thinner?
 
I would love to know what type of paint wetsuit manufacturers use on smooth skin suits. I know of a Greek diving store that sells it in small quantities but i rather make out myself of i would just know what it’s made off....

Someone one this forum must know I would guess.
 
DeeperBlue.com - The Worlds Largest Community Dedicated To Freediving, Scuba Diving and Spearfishing

ABOUT US

ISSN 1469-865X | Copyright © 1996 - 2026 DeeperBlue Global Media Limited.

DeeperBlue.com is an independent digital media platform dedicated to Scuba Diving, Freediving, Ocean Advocacy, and Dive Travel.

Since 1996, we’ve been informing, educating, and inspiring the global diving community through trusted news, features, and shared community experience.

ADVERT