• Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:

    • Join over 44,280+ fellow diving enthusiasts from around the world on this forum
    • Participate in and browse from over 516,210+ posts.
    • Communicate privately with other divers from around the world.
    • Post your own photos or view from 7,441+ user submitted images.
    • All this and much more...

    You can gain access to all this absolutely free when you register for an account, so sign up today!

loading 3 bands

Thread Status: Hello , There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.

doyenofcastle

Well-Known Member
Oct 30, 2012
230
16
58
guys I m building new gun with 3bands but some information is missing ,my previous 2 band slot giving me headache every time try to load them I mean arranging the band ,in picture below you can see my theory is to load the far band in the front to the third notch away from trigger so all band line uniform this mean thias band will go through or inside the 2 band I hope this clear but practically when you pull the band it will slide and kick all band in the slot and will be positioning in the first ! is this clear? so how to solve these ?
_IMG_000000_000000.jpg
 
I'm not sure I understand but why not do it the way gun manufacturers do it? On all my three band guns the band in the rear of the slot (closest to me) goes on the first fin (the one farthest from the trigger), the middle band goes in the middle fin and the front band goes on the rear fin.
 
_IMG_000000_000000.jpg
could you check the drawing ?I am confused because of I used to make a holes for each band but slot needed now for big gun ,u mean band 1 to fin1 and band 3 to fin 3 in bottom drawing?
 
Last edited:
newmuzzle.JPG
Yes, as in the lower drawing. That is the way I've loaded every gun I've owned, including guns the have separate holes for each band. And I don't understand why its necessary to have an open slot rather than separate holes just because the gun is large. Wong and many others use separate holes on large guns.
 
Last edited:
DeeperBlue.com - The Worlds Largest Community Dedicated To Freediving, Scuba Diving and Spearfishing

ABOUT US

ISSN 1469-865X | Copyright © 1996 - 2024 deeperblue.net limited.

DeeperBlue.com is the World's Largest Community dedicated to Freediving, Scuba Diving, Ocean Advocacy and Diving Travel.

We've been dedicated to bringing you the freshest news, features and discussions from around the underwater world since 1996.

ADVERT