-
Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:
- Join over 47,943+ fellow diving enthusiasts from around the world on this forum
- Participate in and browse from over 531,990+ posts.
- Communicate privately with other divers from around the world.
- Post your own photos or view from 7,455+ user submitted images.
- All this and much more...
You can gain access to all this absolutely free when you register for an account, so sign up today!
Project - Asso 135
- Thread starter Gazz
- Start date
Thread Status: Hello
, There was no answer in this thread for more than 90 days.
It can take a long time to get an up-to-date response or contact with relevant users.
It can take a long time to get an up-to-date response or contact with relevant users.
I have put the Tomba 800 kit on the Asso and a 1.5 trigger pin, now to pump it up
I am not sure hoe the performance will be but i expect to kill at 7mts from the muzzle.
Check out this video of a similar gun doing target practice.
[ame=http://vimeo.com/60234317]Sten 140 Hybrid Kit LGSUB (20 atm) on Vimeo[/ame]
I am not sure hoe the performance will be but i expect to kill at 7mts from the muzzle.
Check out this video of a similar gun doing target practice.
[ame=http://vimeo.com/60234317]Sten 140 Hybrid Kit LGSUB (20 atm) on Vimeo[/ame]
That's one sweet video! Good luck with it, looks like it's gonna be a great blue water gun.
D.
Well, the Asso 135 project is now complete, I am very happy with the guns performance and got a chance to take it out for its first shoot since getting the tomba800 kit. I would recommend these kits to anyone!, I kept the metal slider and cut the from of the plastic slider of.
See the video of the gun shooting at 8.6mtrs!!!! Easy to load and shoot with and more range and power than my old riffe metal tech 4s!
See the video of the gun shooting at 8.6mtrs!!!! Easy to load and shoot with and more range and power than my old riffe metal tech 4s!
Last edited by a moderator:
Hi Tromic
Below is a Pic I took to help explain. I put my rigging for the Tombaf714 and Tovarich as well in case you haven't seen this style before.
Uploaded with ImageShack.us
Below is a Pic I took to help explain. I put my rigging for the Tombaf714 and Tovarich as well in case you haven't seen this style before.
Uploaded with ImageShack.us
Nice, Gazz! That is OK.
Thanks!
It would be even better to use aluminum or titanium instead of stainless steel.
Regarding the shaft for tovarich. Slider from mono loop in combination with spectra is OK but the shaft tail should be like on picture with Tomba800, cone angle of about 2 deg to match the piston's boring angle.
Thanks!
It would be even better to use aluminum or titanium instead of stainless steel.
Regarding the shaft for tovarich. Slider from mono loop in combination with spectra is OK but the shaft tail should be like on picture with Tomba800, cone angle of about 2 deg to match the piston's boring angle.
Last edited: