• Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:

    • Join over 47,943+ fellow diving enthusiasts from around the world on this forum
    • Participate in and browse from over 531,990+ posts.
    • Communicate privately with other divers from around the world.
    • Post your own photos or view from 7,455+ user submitted images.
    • All this and much more...

    You can gain access to all this absolutely free when you register for an account, so sign up today!

Question about tables?

Thread Status: Hello , There was no answer in this thread for more than 90 days.
It can take a long time to get an up-to-date response or contact with relevant users.

code2d

New Member
Jul 10, 2007
39
1
0
I am unclear about how to do tables?
CO² Tables
CO² is the common trigger for the urge to breathe. CO² Tables are meant to increase your tolerance to high CO² Levels, you do this by decreasing resting periods before a breath hold. The breath holds in a CO² table are usually 50% of your personal record.

An example of a CO² Table:
1. ventilate 2:30 static 1:30
2. ventilate 2:15 static 1:30
3. ventilate 2:00 static 1:30
4. ventilate 1:45 static 1:30
5. ventilate 1:30 static 1:30
6. ventilate 1:15 static 1:30
7. ventilate 1:00 static 1:30
8. ventilate 1:00 static 1:30
total duration 25:15

O² Tables
O² Tables are meant to increase your tolerance to low O² Levels, you do this by increasing breath holds while keeping the resting periods the same. The last breath hold in an O² table is usually up to 80% of your personal record.

An example of an O² Table:
1.ventilate 2:00 static 1:00
2.ventilate 2:00 static 1:15
3.ventilate 2:00 static 1:30
4.ventilate 2:00 static 1:45
5.ventilate 2:00 static 2:00
6.ventilate 2:00 static 2:15
7.ventilate 2:00 static 2:30
8.ventilate 2:00 static 2:30
total duration 30:45

The CO² and O² tables can be modified to suit the divers will and feeling. I personally do these tables twice a week.
For ventilation do you breath hard,soft or normal and what does the word static even mean? Do I hold my breath??

-thanks
 
What If I can't hold my breath for 1:30?

Then you must change the times of your table. It's written in your first post:

'The breath holds in a CO² table are usually 50% of your personal record.'
'The last breath hold in an O² table is usually up to 80% of your personal record.'

With an O2-table you could start with a static of 15 seconds, then 30, 45,60,75,90

And with a CO2-table you can start with 2 min ventilation, 60 sec static, then 1.45 ventilation, 60 sec static, 1.30 ventilation .....
 
There's a lot of! Like apnoe walking, apnoe jogging and much more.

But I would suggest that you first start with the tables. They are good to investigate your body during the breatholds.
 
You can find many informations about it here in the forum. You can find these informations by using the search-function. This will show you many threads.
 
'Ventilate' means that you breath as normal as possible. Try to avoid hyperventillating.


I am a bit confused: so when going thru tables in phase of ventilation you are breathing as normal as usual and not like when you are preparing for dive? Not sure if i can do the 80% of my PB in static with normal breathing.
 
DeeperBlue.com - The Worlds Largest Community Dedicated To Freediving, Scuba Diving and Spearfishing

ABOUT US

ISSN 1469-865X | Copyright © 1996 - 2026 DeeperBlue Global Media Limited.

DeeperBlue.com is an independent digital media platform dedicated to Scuba Diving, Freediving, Ocean Advocacy, and Dive Travel.

Since 1996, we’ve been informing, educating, and inspiring the global diving community through trusted news, features, and shared community experience.

ADVERT