What do you guys think about having 1 x 20mm rubber on a RA Tuna 100cm? I'd much rather spend less time loading in the water. I'm not sure how the 7.5mm spear will shoot with this setup. In Australia, we shoot 7mm spears with a 16mm rubber and was curious what you guys think
-
Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:
- Join over 47,943+ fellow diving enthusiasts from around the world on this forum
- Participate in and browse from over 531,990+ posts.
- Communicate privately with other divers from around the world.
- Post your own photos or view from 7,455+ user submitted images.
- All this and much more...
You can gain access to all this absolutely free when you register for an account, so sign up today!
Rob Allen Tuna 100cm with 1x20mm rubber?
- Thread starter dzhang09
- Start date
Thread Status: Hello
, There was no answer in this thread for more than 90 days.
It can take a long time to get an up-to-date response or contact with relevant users.
It can take a long time to get an up-to-date response or contact with relevant users.
I use a 16 mm or 17.5 mm band with a 6.5 mm shaft. For 7 mm I use 2 X 14 mm bands, although 1 19 or 20 mm band is common. For a 7.5 mm shaft I'd go for 2 X 16 mm bands. Using less band will give slightly less power, but probably a little better accuracy.
As long as the 20 mm band works and is accurate you should be fine.
As long as the 20 mm band works and is accurate you should be fine.