• Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:

    • Join over 47,943+ fellow diving enthusiasts from around the world on this forum
    • Participate in and browse from over 531,990+ posts.
    • Communicate privately with other divers from around the world.
    • Post your own photos or view from 7,455+ user submitted images.
    • All this and much more...

    You can gain access to all this absolutely free when you register for an account, so sign up today!

Salvimar vacuum barrel kit

Thread Status: Hello , There was no answer in this thread for more than 90 days.
It can take a long time to get an up-to-date response or contact with relevant users.
#64
The Salvimar "Vuoto 11" muzzle kit has 24mm OD.

The old (blue handle) "Cyrano" and the "Sten 11" muzzles have 20mm OD and sit in front of a flat-ended nose cone - so the "Vuoto 11" kit can be fitted on these without any problems.

The "Cyrano Evo" (42-70cm) is supplied with a muzzle identical to the "Sten 11" but it sits inside a forward well in the nose cone that covers the rear end of the muzzle. The well has a diameter that's a little larger than 20mm and it is approx. 11mm deep.

The "Vuoto 11" muzzle can be made to fit the "Cyrano Evo" by removing material from the muzzle, so it fits into the well. The machined area will need a suitable new corrosion protection.

Jégwan
 
#68
Jegwan is correct - Salvimar's dry muzzles wont work for Seac guns.

For Seac, Seatec Evo-Air will work (make sure you get the 1.5mm thread pitch model...;-)) or get an STC (expensive) or a Tomba (maybe there's a bit of a wait?).
 
#69
  • Like
Reactions: grantl
#72
kwtony said:
Tromic makes a fantastic dry barrel kit for your seac, i bought one for my asso 90 a while ago. In 9/32


Sent from my iPhone using Tapatalk
Click to expand...

That's true kwtony.
I don't have a Seac myself, but I do have various of his Tomba kits on other guns - and I'm very pleased.
I also use his sliders together with the Vuoto. Great stuff!
Jégwan
 
#73
I am thinking about to make adapter like this on image for spears from 6,5 mm to 8 mm for Salvimar kit.
This would centralised the spear what is especially important for 6,5 mm shaft.

5fpzec.jpg
 
#74
I couldn't agree more. Even for 7mm, there seemss to be too much room in the muzzle. I thought about this a while back when I realized STC bushings are not much more than 1/10 - 2/10s of a mm bigger than the spear itself.
Do you think the oversized Salvi muzzle affects precision?
 
#75
Diving Gecko said:
I couldn't agree more. Even for 7mm, there seemss to be too much room in the muzzle. I thought about this a while back when I realized STC bushings are not much more than 1/10 - 2/10s of a mm bigger than the spear itself.
Do you think the oversized Salvi muzzle affects precision?
Click to expand...

Yes I do, especially with free shaft.
 
You must log in or register to reply here.
DeeperBlue.com - The Worlds Largest Community Dedicated To Freediving, Scuba Diving and Spearfishing

ABOUT US

ISSN 1469-865X | Copyright © 1996 - 2026 DeeperBlue Global Media Limited.

DeeperBlue.com is an independent digital media platform dedicated to Scuba Diving, Freediving, Ocean Advocacy, and Dive Travel.

Since 1996, we’ve been informing, educating, and inspiring the global diving community through trusted news, features, and shared community experience.

ADVERT

Community platform by XenForo® © 2010-2025 XenForo Ltd.
Top Bottom
Back