• Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:

    • Join over 44,280+ fellow diving enthusiasts from around the world on this forum
    • Participate in and browse from over 516,210+ posts.
    • Communicate privately with other divers from around the world.
    • Post your own photos or view from 7,441+ user submitted images.
    • All this and much more...

    You can gain access to all this absolutely free when you register for an account, so sign up today!

seac piston 11.2

Thread Status: Hello , There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.
What is the frequency of piston replacement?

Thxx

Not often. Only if it breaks which it shouldn't do with normal use and certainly not if you don't run a vacuum muzzle and then still only if you run very high pressures.
But can I ask something, did you actually buy the gun yet? The reason I am asking is because you also seem to be posting about rubber guns? And also, like I said before, if you intend to vacuum muzzle this gun, then there are better options than a Seac 11mm gun.
 
hello,
I'm interested in buying a new speargun, and just have a great discount on seac caccia 115 or 95 same price.
so iwanted to know if there are spare parts because the piston is non-standard size.
I have a older air pressure speargun cressi sl 40 never had any issues with it.
I ask few times beacuse a band speargun at the same size of the seac caccia will cost me two or three times.
so i try to get more info because maybe its not so good it there is problem to find spare parts.
 
hello,
I'm interested in buying a new speargun, and just have a great discount on seac caccia 115 or 95 same price.
so iwanted to know if there are spare parts because the piston is non-standard size.
I have a older air pressure speargun cressi sl 40 never had any issues with it.
I ask few times beacuse a band speargun at the same size of the seac caccia will cost me two or three times.
so i try to get more info because maybe its not so good it there is problem to find spare parts.

Seac is a fairly big company so I am sure you can find spareparts. I just still don't understand why you are so set on that gun? Is it a whole lot cheaper than e.g. a Predathor Vuoto? You have asked about vacuum muzzles, too I think so I assume you will want to add that? As we have told you, a Seac 11mm gun is about the most difficult gun to find a vac muzzle for. Either you have to go with STC, which is not cheap or get a custom made muzzle from Tomba/Tomi/Marko which is about E70 unless they have changed the pricing.

If you need to save money and if you are in France/Greece/Spain/Italy or somewhere nearby, you can also look for secondhand guns and then just upgrade them with a vac muzzle if needed.
 
Last edited:
DeeperBlue.com - The Worlds Largest Community Dedicated To Freediving, Scuba Diving and Spearfishing

ABOUT US

ISSN 1469-865X | Copyright © 1996 - 2024 deeperblue.net limited.

DeeperBlue.com is the World's Largest Community dedicated to Freediving, Scuba Diving, Ocean Advocacy and Diving Travel.

We've been dedicated to bringing you the freshest news, features and discussions from around the underwater world since 1996.

ADVERT