• Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:

    • Join over 44,280+ fellow diving enthusiasts from around the world on this forum
    • Participate in and browse from over 516,210+ posts.
    • Communicate privately with other divers from around the world.
    • Post your own photos or view from 7,441+ user submitted images.
    • All this and much more...

    You can gain access to all this absolutely free when you register for an account, so sign up today!

The Dessault Quattro Classic 75cm Speargun

Thread Status: Hello , There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.

podge

Always Hungry
May 16, 2006
6,225
1,655
403
56
Just picked my new Quattro last week and what a gun it is, light and well balanced in the water with a good size grip and a grip safety, very strong 16mm bands and a spear with a cathedral point and sharks fin notch’s instead of cut outs for the wishbone to connect with.
With previous guns when I’m on a long swim I’ve had to rest the gun down at my side and pointing backwards but with the Quattro it’s not a problem as the balance is so much better, it seems to ride in the water at just the right angle so as to be pointing forward but with just a touch of upward angle so as to be very comfortable when going through the water.
The grip safety is also a good idea, as it only becomes ready to fire when your hand is fully enclosed around the grip. You can also lock the safety into the fire position by simply clicking it forward and up at the same time which is a nice touch if you’re not a fan of safety catches like myself.
The power aspect of this gun comes from some truly spectacular 16mm bands that have way more power than the 18mm bands from the previous 75cm gun.
As for the spear itself it’s comes with a 3 edged point rather than a circular point which will make keeping it sharp a lot easier and the sharks fin notch’s are set on top of the spear which makes loading nice and positive, I’ve got a dynema wishbone so the only modification needed was to round the sharp edges off so as not to cut the braid.
In the water the gun tracks well and feels nice a light with a very pointable front end for quick target acquisition.
All in all a tiptop piece of kit and well worth the money.

I believe the Dessault brand is a little hard to come by in the UK but if you’re interested Glowworm (on the forums) can source them with very little trouble.
 
Last edited:
Reactions: spaghetti
Re: The Dassault Quattro Classic 75cm Speargun

Congratulations for the new toy! Hurra'!!! :friday
I agree that the bands are something special: I too use Dessault 16mm bands on my Seatec 77: very reactive rubbers, very strong punch they give. Probably the best bands on the market, especially for shorter guns like a 75 or thereabouts.
The gun looks great indeed, very elegant design. :inlove
 
Re: The Dassault Quattro Classic 75cm Speargun

Those bands really are the business and I was going to go for 18mm, well to be honest I’m glad I didn’t.
You’re right about the design to as it defiantly tracks though the water with ease.
All I need now is a few more fish to show up and we’re all set for a good summer.
 
Re: The Dassault Quattro Classic 75cm Speargun

One thing I almost forgot to mention was the Quattro’s full length rail which will no doubt add accuracy and overall spear control to the list of top features for this gun.
 
Re: The Dassault Quattro Classic 75cm Speargun

Nice looking gun! Neat handle design should have a pain free load. Have you thought about removing those screw on ends on the bands and tying in the wishbones?
 
I was given some tie in type dynema wishbones last summer to try on my Quattro carbon but i haven't yet as the screw on wishbones just seem easier to use.
 
Re: The Dassault Quattro Classic 75cm Speargun

Pastor said:
Nice looking gun! Neat handle design should have a pain free load. Have you thought about removing those screw on ends on the bands and tying in the wishbones?
Click to expand...


Not a thing that I’ve ever done mate, all the gun’s I’ve used have always had the screw type and to be honest I wouldn’t have a clue how to tie them off.
 
Very Very nice dude, But I must ask doesn't clear mono give you a hard time underwater?
I like how the loading pad is literally part of the gun like it doesn't even extend. {wish my RA had that option}

Also RA 16mm bands are extremely good, they can push a 7mm shaft far beyond what many expect.
 


Your right about the mono and as soon as my suppler can get his act together it will be replaced with dynema.
 
I think dynema as a metal wishbones replacement is a bit like camo wetsuits - might work for the better might not, but you feel a lot better using them !
I would give them a try?
 
Changing wishbones to dynema may have some positive effects: no risking to chop your fingers if it slips from grip while loading; no parachute effect of the plastic screwing fittings (causes a slight loss of power, but really very slight); avoid the scratching and chopping of the barrell; make shots more quiet (in the sense of less loud).
However, it's not necessary. Speaking for one I still use traditional articulated wishbones: get them screw them and forget about ( I used to act the same with women when I was younger :t).
I still have a Viper, dsigned by Hugues Dessault many years ago, with a full length rail barrell similar as the Quatro: I've been using traditional wishbones with it and hasn't caused any scratching on the barrell along the years...
 
Reactions: Mr. X
on the euro guns, i almost exclusively use the beuchat tahiti wishbone..its very easy to grip and load, provides clearance when loaded so that your fingers are never caught between barrel and bands, will not break, locks very well on euroshafts either with notch or fin, no filing,smoothing edges needed...fits most bands (not Seatec Though)
 
I've seen first hand the result of an articulated wishbone breaking, so I think dyneema is a sensible move, nothing to do with noise. The reason I would tie them in rather than screw them in is because it is a lot easier to replace one that way in the water should it break (and they do).
 
But look at how much they cost, 10 of those and you could start thinking about a new gun
 
why would you need 10, it doesnt break, unlike dyneema
 
Pastor said:
The reason I would tie them in rather than screw them in is because it is a lot easier to replace one that way in the water should it break (and they do).
Click to expand...

Pastor are you really saying it is easier to replace a dynema wishbone in the water than replace a screw on wishbone
 
I had an ariticulated wishbone go on me just as I was trying to put it in the notch:crutchNot fun, I was lucky I had 5mm gloves on but it still took a large lump of flesh out of one finger and bruised another for a couple of weeks...
 
foxfish said:
Pastor are you really saying it is easier to replace a dynema wishbone in the water than replace a screw on wishbone
Click to expand...
Yes, you can tie a spare wishbone on the butt of your gun and it's only 2 sheet bends to attach a new one. No swimming back to your float and looking for a spare, just a quick cut and tie, even with gloves on. Of course you do need to tie in loops into your bands .
 

Attachments

  • bandmaking 040.jpg
    91.2 KB · Views: 210
Last edited:
Reactions: Mr. X
I rather have a dynema wishbone break on me throughout use, that a screw on wishbone take half of my finger off. Also I don't like the noise they make.

I have to admit though, theres nothing better than to screw the wishbone in and that's it all done! Same applys when maintence days come!
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…