Post from ESK (from garpun.spb.ru)
Friends, we all love adrenaline in the process of searching and hunting, but once we go ashore, gray days begin ... we need to somehow dry the "desalinated" equipment so that the water can quickly flow and it dries out well. For drying equipment previously all the available means were used - such as ordinary hangers, ropes, hooks, tree branches, etc. As a result, the little penny in front of the entrance to the garage, with accessories hanging around, resembled a platform for decorating a Christmas tree. At the same time the biggest problems in the correct placement deliver such small items as socks and gloves. Since they require giving a certain position for the rapid flow of water, and the use of all kinds of clothespins and hooks, leaves indelible marks on the products of neoprene.
Having thoroughly discussed this problem with Wasil Beketoff, a friend of the underwater hunt, and having started the process for solving it, first on paper and then in real layouts, we came to an understanding of the technical specifications for the future design. And by trial and error, the product was born - Hanger Dryer Underwater Equipment, or abbreviated VSPS-3. The number three is just the third one, made and tested by us.
And the last point in its design was put by Vasily, who said: This “Fac” should not only hang - but also stand!
A little about the features: VSPS3 in the folded state is a compact product from the heels of stainless wire, which are decorated in two shoulders under neoprene socks or boots, and two "fake" for drying gloves.
Sergey Ermolenko (ESK) & Vasily Beketov
Simferopol 06/08/2019
To bring the VSPS-3 in working condition, the fakie are revealed, and the design acquires the ability to “stand up”.
Further, we place it in a basin or pallet, “decorate” like a New Year tree with socks and gloves.
Those. water does not drip anywhere, and does not irritate the nervous system of the surrounding household. After the water is drained, we transfer our design to the draft,
and later on, right on the dryer, we remove it in the cupboard
Friends, we all love adrenaline in the process of searching and hunting, but once we go ashore, gray days begin ... we need to somehow dry the "desalinated" equipment so that the water can quickly flow and it dries out well. For drying equipment previously all the available means were used - such as ordinary hangers, ropes, hooks, tree branches, etc. As a result, the little penny in front of the entrance to the garage, with accessories hanging around, resembled a platform for decorating a Christmas tree. At the same time the biggest problems in the correct placement deliver such small items as socks and gloves. Since they require giving a certain position for the rapid flow of water, and the use of all kinds of clothespins and hooks, leaves indelible marks on the products of neoprene.
Having thoroughly discussed this problem with Wasil Beketoff, a friend of the underwater hunt, and having started the process for solving it, first on paper and then in real layouts, we came to an understanding of the technical specifications for the future design. And by trial and error, the product was born - Hanger Dryer Underwater Equipment, or abbreviated VSPS-3. The number three is just the third one, made and tested by us.
And the last point in its design was put by Vasily, who said: This “Fac” should not only hang - but also stand!
A little about the features: VSPS3 in the folded state is a compact product from the heels of stainless wire, which are decorated in two shoulders under neoprene socks or boots, and two "fake" for drying gloves.
Sergey Ermolenko (ESK) & Vasily Beketov
Simferopol 06/08/2019
To bring the VSPS-3 in working condition, the fakie are revealed, and the design acquires the ability to “stand up”.
Further, we place it in a basin or pallet, “decorate” like a New Year tree with socks and gloves.
Those. water does not drip anywhere, and does not irritate the nervous system of the surrounding household. After the water is drained, we transfer our design to the draft,
and later on, right on the dryer, we remove it in the cupboard
Last edited: