Is this the way to go...SS lineshaft with brass disconnect. 5' heavy landyard to tie off to rig. Heavy shaft with sliptip. Seahornet,riffe or Wong?
thankee
thankee
-
Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:
- Join over 44,280+ fellow diving enthusiasts from around the world on this forum
- Participate in and browse from over 516,210+ posts.
- Communicate privately with other divers from around the world.
- Post your own photos or view from 7,441+ user submitted images.
- All this and much more...
You can gain access to all this absolutely free when you register for an account, so sign up today!
louisanna rig setup??
- Thread starternightstalker
- Start date
Thread Status: Hello
, There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.
It can take a long time to get an up-to-date response or contact with relevant users.
Rgdvr:
we are using scuba. I've got alot experience down to 75' spearing but want to setup my rig so I don't have too much of a learning curve at 120' on the rigs next week. Have a solid day to rig when I get down there and learn but was hoping to get the skinny from a rigdvr like yourself. I'm a retired navy diver so have solid training....
we are using scuba. I've got alot experience down to 75' spearing but want to setup my rig so I don't have too much of a learning curve at 120' on the rigs next week. Have a solid day to rig when I get down there and learn but was hoping to get the skinny from a rigdvr like yourself. I'm a retired navy diver so have solid training....
when are you going? What type of gun?
definately ss cable. I use 500# coated. I use 3 wraps on the gun and when tanking it I usually just use a brass clip connected to the gun bungie. If I want to leave it I unclip it from the gun and wrap it around a rig leg.
Be careful and good luck.
definately ss cable. I use 500# coated. I use 3 wraps on the gun and when tanking it I usually just use a brass clip connected to the gun bungie. If I want to leave it I unclip it from the gun and wrap it around a rig leg.
Be careful and good luck.
and don't forget...
...with an extra shaft, fresh batteries in the 'puter and the notion drilled into your noggin that the bubbles always point the way up and screw the fish if it comes to it.
...with an extra shaft, fresh batteries in the 'puter and the notion drilled into your noggin that the bubbles always point the way up and screw the fish if it comes to it.