Thought I'd start a thread on small inner diameter rubber for speargun bands and shaft configurations.
I'm mostly interested in smaller guns from 7oomm of band stretch to 1120mm of band stretch.
I don't use guns above that and there is a lot of info on bigger bands/shaft configuration on the spearboard forum.
Sooo...
115cm / 6.25mm
I have this shaft in a gun with 790mm of band stretch. Salvimar shaft.
Currently using a single 16.5mm rubber (Cressi S45?...).
Works well, quite a skinny gun. Probably won't change to double 14mm small ID rubber.
120cm / 6.5mm
This is a Hunt shaft in a wooden gun (current build) with more mass than than the gun above.
950mm of band stretch.
I'm going to try double 14mm bands.
Looking around I can get the following :
Cressi Pure Brown 14mm
Sigalsub Reactive 14.5mm
Sigalsub Extreme 13mm or 14.5mm
It looks like Primeline makes these rubbers as well as its own rubber (appear to be just 3 manufacturers of rubber - Primeline, Dunlap, Kent)?
Anyway, for these smaller guns with shafts from 6mm to 7mm and spear shafts from 115cm to 130cm what combinations of rubber and shafts have worked for you and also what definitely doesn't ?
Was going to get 3m of Cressi Pure Brown 14mm - good idea ?
I'm mostly interested in smaller guns from 7oomm of band stretch to 1120mm of band stretch.
I don't use guns above that and there is a lot of info on bigger bands/shaft configuration on the spearboard forum.
Sooo...
115cm / 6.25mm
I have this shaft in a gun with 790mm of band stretch. Salvimar shaft.
Currently using a single 16.5mm rubber (Cressi S45?...).
Works well, quite a skinny gun. Probably won't change to double 14mm small ID rubber.
120cm / 6.5mm
This is a Hunt shaft in a wooden gun (current build) with more mass than than the gun above.
950mm of band stretch.
I'm going to try double 14mm bands.
Looking around I can get the following :
Cressi Pure Brown 14mm
Sigalsub Reactive 14.5mm
Sigalsub Extreme 13mm or 14.5mm
It looks like Primeline makes these rubbers as well as its own rubber (appear to be just 3 manufacturers of rubber - Primeline, Dunlap, Kent)?
Anyway, for these smaller guns with shafts from 6mm to 7mm and spear shafts from 115cm to 130cm what combinations of rubber and shafts have worked for you and also what definitely doesn't ?
Was going to get 3m of Cressi Pure Brown 14mm - good idea ?
Last edited: