• Welcome to the DeeperBlue.com Forums, the largest online community dedicated to Freediving, Scuba Diving and Spearfishing. To gain full access to the DeeperBlue.com Forums you must register for a free account. As a registered member you will be able to:

    • Join over 44,280+ fellow diving enthusiasts from around the world on this forum
    • Participate in and browse from over 516,210+ posts.
    • Communicate privately with other divers from around the world.
    • Post your own photos or view from 7,441+ user submitted images.
    • All this and much more...

    You can gain access to all this absolutely free when you register for an account, so sign up today!

Vlanikgun

Thread Status: Hello , There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.
,.........................
 

Attachments

  • vufOnoxetUQ.jpg
    vufOnoxetUQ.jpg
    84.6 KB · Views: 311
Three fat Carp which have thick scales and are hard to penetrate. Perhaps you can tell us the shooting distance at which the shots were taken.
 
Дистанция стрельбы, от одного до двух метров.
Shooting distance, from one to two meters.
 
These guns which have revised handles look pretty good!
i285415639411663973._szw1280h1280_.jpg

Vlanik 70, The most powerful of the line of guns ... With an envelope of 70 cm, it has an amazing shooting range of 5.6 meters ... It is widely used both in freshwater reservoirs and during sea hunting ...

The price of a set with one harpoon is 9000 rubles.

Price spare harpoon 1000 rubles.
i285415639412951849._szw1280h1280_.jpg
 
Last edited:
An option if you cannot buy a genuine Vlanik gun is to buy one of the clones. Here is a link to the Evolusion pistonless gun which is very similar to the Vlanik gun.
http://gidromania.com/pnevmaticheskie-ruzhja/pnevmaticheskoe-besporshnevoe-titanovoe-ruzhe/
_MG_0431.CR2.jpg
_MG_0428.CR2.jpg

Longest models are 70 cm with options as to where the grip handle is positioned on the gun. Basically this sets the length of the pull rod on the gun when the handle is placed at a different position. Price before shipping is about US$250. The barrel of the Evolusion gun is made from titanium. Thanks to the buoyancy element in the handle the gun floats after the shot.



This interesting video shows an “Evolusion” pistonless speargun in action, note the hunter is hiding just out of frame at times and is using some sort of fish decoy anchored by a near invisible tethering line that encourages fish to gather near it and then “wham” they get skewered at sometimes surprisingly long range.
 
Last edited:
  • Like
Reactions: Diving Gecko
If you want to buy a "Vlanik" gun then contact this guy VLA_NIK on www.apox.ru. He says that there are already two "Vlanik" guns in Australia. I don't know how he is related to VLANIK himself who has posted here in the past, but he says people are welcome to have his guns. He must be connected with Vlanik as his posts always carry the http://vlanikgun.simplesite.com/ link.

He (i.e. VLA_NIK) can be found here as he posted on this thread http://apox.ru/forum/topic/804-podvodnie-pistoleti-vlanik/ (Posted on September 10, 2017 - 15:21 even though posts commence in 2005).
vlanik parts.jpg

photo from www.apox.ru
vlanik gun in case.jpg

Here is a relevant quote translated from the Russian (autotranslation by BING)
The main consumable is oil, which periodically needs to be topped up ... Harpoon sealer (oring) is designed for 1000 shots and more ... Pump sealer (rubber disk with hole) can be made by yourself ... Harpoons are hardened and not consumable ... live more than 40 years, if you don’t lose it ... You can pick it up in the store and refine ... all the details on the site ...
http://vlanikgun.simplesite.com/
 
Last edited:
These photos were posted by VLA_NIK and seem to be important as they have been highlighted on the thread.
VLANIK WITH LARGE MUZZLE SHROUD.jpg
VLANIK WITH LARGE MUZZLE SHROUD 2.jpg
VLANIK WITH LARGE MUZZLE SHROUD 3.jpg

Note that if you use the "Vlanik" gun in saltwater then the tiny amounts of water carried into the gun during loading by the detachable spear tap cap gap on the shaft will need to be emptied out periodically in order to prevent internal corrosion of the gun's tank. If the gun has a titanium tank then less need to do so as titanium is very corrosion resistant, but aluminium alloy is more susceptible even with oil sloshing around inside the gun.
 
Last edited:
[QUOTE = "popgun pete, post: 981757, участник: 18674"] Эти фотографии были опубликованы VLA_NIK и кажутся важными, поскольку они были выделены в потоке. [ATTACH = full] 52912 [/ ATTACH] [ATTACH = full] 52913 [/ ATTACH] [ATTACH = полный] 52914 [/ ATTACH]
Обратите внимание, что если вы используете пистолет «Владелец» в соленой воде, то небольшое количество воды, переносимой в пистолет во время загрузки с помощью съемного колпачка колпачка на валу, необходимо периодически опорожнять, чтобы предотвратить внутреннюю коррозию пистолета бак. Если у пистолета есть титановый резервуар, то меньше нужно сделать так, чтобы титан был очень устойчив к коррозии, но алюминиевый сплав более восприимчив даже при размахе масла внутри пистолета. [/ QUOTE]
[QUOTE = "popgun pete, post: 981757, участник: 18674"] Эти фотографии были опубликованы VLA_NIK и кажутся важными, поскольку они были выделены в потоке.View attachment 52912View attachment 52913View attachment 52914
Обратите внимание, что если вы используете пистолет «Вланик» в соленой воде, то небольшое количество воды, переносимой в пистолет во время загрузки с помощью съемного колпачка колпачка на валу, необходимо периодически опорожнять, чтобы предотвратить внутреннюю коррозию пистолета бак. Если у пистолета есть титановый резервуар, то меньше нужно сделать так, чтобы титан был очень устойчив к коррозии, но алюминиевый сплав более восприимчив даже при размахе масла внутри пистолета. [/ QUOTE]
Очередная глупость и полное незнание физики...Ружья Vlanik, не пьют воду в отличии от обычных пневматов...
 
[QUOTE = "popgun pete, post: 981757, участник: 18674"] Эти фотографии были опубликованы VLA_NIK и кажутся важными, поскольку они были выделены в потоке. [ATTACH = full] 52912 [/ ATTACH] [ATTACH = full] 52913 [/ ATTACH] [ATTACH = полный] 52914 [/ ATTACH]
Обратите внимание, что если вы используете пистолет «Владелец» в соленой воде, то небольшое количество воды, переносимой в пистолет во время загрузки с помощью съемного колпачка колпачка на валу, необходимо периодически опорожнять, чтобы предотвратить внутреннюю коррозию пистолета бак. Если у пистолета есть титановый резервуар, то меньше нужно сделать так, чтобы титан был очень устойчив к коррозии, но алюминиевый сплав более восприимчив даже при размахе масла внутри пистолета. [/ QUOTE]
[QUOTE = "popgun pete, post: 981757, участник: 18674"] Эти фотографии были опубликованы VLA_NIK и кажутся важными, поскольку они были выделены в потоке.View attachment 52912View attachment 52913View attachment 52914
Обратите внимание, что если вы используете пистолет «Вланик» в соленой воде, то небольшое количество воды, переносимой в пистолет во время загрузки с помощью съемного колпачка колпачка на валу, необходимо периодически опорожнять, чтобы предотвратить внутреннюю коррозию пистолета бак. Если у пистолета есть титановый резервуар, то меньше нужно сделать так, чтобы титан был очень устойчив к коррозии, но алюминиевый сплав более восприимчив даже при размахе масла внутри пистолета. [/ QUOTE]
Очередная глупость и полное незнание физики...Ружья Vlanik, не пьют воду в отличии от обычных пневматов...
Please explain what you mean by this statement. The water I am referring to is that when the join in the shaft and the detachable spear tail cap pass through the seal in the muzzle during muzzle loading carried out underwater. This issue has been discussed at length in the associated "pneumatic speargun without piston" thread https://forums.deeperblue.com/threads/pneumatic-speargun-without-piston.94538/ and even your own countrymen have acknowledged this is a factor with this type of speargun. As for ignorance of Physics, well I am a university qualified Applied Physicist and probably as well equipped as anyone here to discuss these matters, so I hope you take a different attitude to these discussions as we are not in Russia now where personal put-downs intrude on technical discussions.
http://garpun.spb.ru/forum/viewtopic.php?p=55363#55363
 
Last edited:
While speaking of guns without pistons I wonder what happened with this one,
pistonless gun with 3 ball sear.jpg

I know that a gun was built, as can be seen here, but do not know what became of it or how well it performed.
207168204.jpg

Then there are the friction trigger piston-less guns which do not need a notch in the spear as the "Vlanik" and similar guns do, the annular notch being positioned behind the spear tip.
friction trigger piston-less guns.jpg

All images from www.apox.ru, these last two guns are friction trigger or FZSM (ФЗСМ ) as they are referred to in Russia.
Here are some muzzle parts, you can see the detachable spear tail cap on the end of the spear and the friction element eccentric that will be used to jam the spear when the gun is cocked..
fzsm gun parts and tail cap.jpg
 
Last edited:
На форуме, http://garpun.spb.ru/forum/viewtopic.php?p=55363#55363 , исписано 174 страницы ... Эта тема переименовывалась три раза ... Назначение темы, как правильно делать беспоршневые пневматы ... За десять лет обсуждений ружей Vkanik, эти люди так и не поняли принципы работы моего ружья ... Поэтому они не могут сделать надёжный рабочий вариант ... Все их потуги закончились на уровне картинок ...
На сегодняшний день, имеется лишь два клона моих ружей ... Но и они отстают по развитию на пять лет ...
Кое что можно увидеть тут ... @vlanik_gun
 
Тогда есть триггерные пушки без трения, которые не нуждаются в выемке в копье, как это делают «Владелец» и аналогичные пушки, кольцевая выемка расположена за наконечником копья.
///////
Всё это было опробовано очень давно... и оказалось не нужным, и бесполезным...
 
Говоря о пушках без поршней, я задаюсь вопросом, что случилось с этим,
////////
Это ружьё так и небыло доделано окончательно...Человек который его делал, умер...
 
The last time you were here you refused to sell your guns outside of Russia, by keeping this thread running I thought maybe you might change your mind, but ultimately it is up to you. No one is trying to undermine your achievements, and some here expressed a desire to buy one of your guns, although whether they are still interested after all this time I do not know.
 
[QUOTE = "Vlanik, post: 981763, member: 19907"] Speaking of guns without pistons, I wonder what happened to this,
////////
This gun was never completed yet ... The man who made it died ... [/ QUOTE]
I am very sorry to hear that, his gun looked very nice and it appeared to have a lot of effort put into it. My condolences to his family and friends.
 
Пожалуйста, объясните, что вы подразумеваете под этим заявлением. Вода, о которой я говорю, заключается в том, что когда соединение в шахте и съемный колпачок копья проходит через уплотнение в морде во время дульной нагрузки, проводимая под водой.
///////
Зазор между хвостовиком гарпуна и внутренней стенкой пробки, всего 0,02 мм. на сторону...По сути это капилярная щель...И вода из этой щели (зазора) не может выливаться в ресивер по определению...Более того, всё что имеется в ресивере (а это масло) постепенно, с каждым выстрелом, выводится наружу...(эффект аквопланирования и глиссирования)
 
[QUOTE = "popgun pete, post: 981764, member: 18674"] В последний раз, когда вы были здесь, вы отказались продавать свои оружие за пределами России, продолжая эту нить, я подумал, может быть, вы можете передумать, но в конечном итоге это вам решать. Никто не пытается подорвать ваши достижения, и некоторые из них выразили желание купить одно из ваших орудий, хотя интересуются ли они все это время я не знаю. [/ QUOTE]
Я уже указал путь, как можно приобрести мои ружья...Других вариантов не будет...
 
So you are saying that the water remains in the tiny annular gap when the gun is cocked to shoot and never gets into the gun interior in terms of washing off or being left behind.. Well that is very good and the machining of the parts must be very accurate. Now what about selling your guns in the West? Looks like we are typing at the same time, but while you are here who is VLA_NIK and is he an associate or making his own guns, it is difficult to tell from outside.
 
Мне часто приходится менять НИК и акаунт на разных форумах ... Но что бы меня узнавали, я ставлю подпись ... http://vlanikgun.simplesite.com/ Потом меня снова удаляют ... Я снова меняю НИК, заново регистрируюсь и ставлю подпись ... И так много, много раз на разных форумах ...
 
DeeperBlue.com - The Worlds Largest Community Dedicated To Freediving, Scuba Diving and Spearfishing

ABOUT US

ISSN 1469-865X | Copyright © 1996 - 2024 deeperblue.net limited.

DeeperBlue.com is the World's Largest Community dedicated to Freediving, Scuba Diving, Ocean Advocacy and Diving Travel.

We've been dedicated to bringing you the freshest news, features and discussions from around the underwater world since 1996.

ADVERT